[1000mp] 10 meters

Tue, 16 Apr 2002 16:51:01 +0200

Hi Ole

You have trouble with your 4th VCO, we have had the same problem on 15 and
17 meters, if you check closely you see that the problem extends further
than just 10 meters covering a lagre frequency portion (the one of VCO4),
probably you can solve the problem by exchanging the driving cirquit for
your vco (what we did), this is pretty stikky because its a large SMD
cirquit to remove.

Anyhow start by testing the VCO if you are lucky you only need to ajust the
VCO by trimming it from inside your radio, you should get a service
complement for your Radio so you won't mess up anything else, there is a
section in that about checking the right VCO values!

Good luck!

/Teemu SM0WKA // SM0W
www.sm0wka.com

----- Original Message -----
From: "R L Johnson" <[email protected]>
To: "1000MP" <[email protected]>
Sent: Monday, April 15, 2002 11:54 PM
Subject: [1000mp] 10 meters

> question to the group, My 1000MP just recently went dead on 10 meters
> cannot recieve or xmitt and the display is ok. but on the B reciever
> I can hear the signals
> any thought to what might be wrong
>
> Thank you
> Ole N0ABE
> _______________________________________________
> List Moderator: Richard Lubash N1VXW
> 1000mp mailing list
> [email protected]
> To Change Options or Unsubscribe:
> http://mailman.qth.net/mailman/listinfo/1000mp
>