[Yaesu] FT-107M

[Danny Pease]

I am unsure about the low pass filters but my guess is the 2 auxiliary positions might be used for 12 and 17 meters. You would have to purchase the proper crystals for each band. I believe there is already a 10 MHz position on the band switch for WWV, not sure if it is easily enabled to transmit for 30 meters though.


Danny NG9R



<div>-------- Original message --------</div><div>From: Dan Cotsirilos <k9dtc at comcast.net> </div><div>Date:12/22/2014  4:18 PM  (GMT-06:00) </div><div>To: Steve Sutfin <stephoto at mind.net> </div><div>Cc: yaesu at mailman.qth.net </div><div>Subject: Re: [Yaesu] FT-107M </div><div>
</div>Could be? But there are 2 spots?




Dan K9DTC


-----Original Message----- 
From: Steve Sutfin
Sent: Monday, December 22, 2014 4:12 PM
To: Dan Cotsirilos
Cc: yaesu at mailman.qth.net
Subject: Re: [Yaesu] FT-107M

Possibly the 11meter CB band. I know some early versions of my FT-901
have a spot for the 11meter crystal on the VCO & crystal boards.
Steve k7dna

On Dec 22, 2014, at 12:37 PM, Dan Cotsirilos wrote:

> I have a early ft-107m without the WARC bands. There are 2 spots on  the 
> band switch “AUX-1 and AUX-2”. Does anyone know what bands can  be put in 
> these? All the manuals online are for the later model?
>
> Dan K9DTC
>
>
> ______________________________________________________________
> Yaesu mailing list
> Home: http://mailman.qth.net/mailman/listinfo/yaesu
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Yaesu at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html 

______________________________________________________________
Yaesu mailing list
Home: http://mailman.qth.net/mailman/listinfo/yaesu
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Yaesu at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html