[Yaesu] FT-1000MP Antenna Tuner

[Dr. Gerald N. Johnson]

Look for a power up reset option. If that clears it up, it probably 
needs a controller memory hold battery usually soldered in place and 
usually a 3 volt lithium cell. Getting one with the right solder tabs 
can be a pain now that the USPS won't deliver any amount of lithium 
cells. You need an ungrounded soldering iron to do the replacement 
taking care than you are working with power own.

73, Jerry, K0CQ

On 9/4/2013 7:04 PM, Jimk8mr at aol.com wrote:
> I have a FT-1000MP on loan from a good friend. Works great except the
> antenna tuner will not tune properly. It will search for a match, going  through
> both good and bad matches as it searches, and finally quits at what I
> think is some random bad match ( I suspect it times out on the search).  This is
> true even if tuning into a 50 ohm load.
>
> My friend never used the tuner, so does not know how long this has been a
> problem, or if maybe forever.
>
> Does anybody have any settings, menu items, or other suggestions on what to
>   try to get the tuner to work?
>
>
>
> 73  -  Jim   K8MR
> ______________________________________________________________
> Yaesu mailing list
> Home: http://mailman.qth.net/mailman/listinfo/yaesu
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Yaesu at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>