[Yaesu] From CO8LY

[Dr. Gerald N. Johnson]

See page 10 of the operating manual, and probably the technical 
supplement.  Available for download from: > 
http://yaesu.com/indexVS.cfm?cmd=DisplayProducts&ProdCatID=102&encProdID=0372FA803B7BBADBF3076C94ACA7A8C5&DivisionID=65&isArchived=0

or mods.dk. You will also need to know the keying requirments of the 
amplifer to make certain the 897 transistor can switch it without being 
overloaded. It may take a transistor or two as a control unit to protect 
the 897. You should also connect the ALC circuit also mentioned on page 10.

> http://bama.edebris.com/manuals/
  has a FL2100z manual.

You will need an 8 pin minidin connector or cable. I find it easier to 
purchase an Apple modem or printer cable and cut than to solder wires to 
a bare minidin connector.

73, Jerry, K0CQ

On 10/10/2013 6:57 AM, co8ly wrote:
> Dear friends
>
> I need that somebody explains to me as connecting the Yaesu FT-897D with a
> lineal
> FL2100z, I need to know where to connect the PTT of the lineal one in the
> FT-897D.
>
> Also if somebody has badges or components of the old Yaesu FT-747, mine a
> ray
> burn the PLL that this in the front part of the equipament and I need to
> repair it
> because it is very strong to make contest.
>
> Forgive so many nuisances.
>
> A million thank you in advance
>
> Strong hug
>
> Eduardo CO8LY
>
>
>
>
> ______________________________________________________________
> Yaesu mailing list
> Home: http://mailman.qth.net/mailman/listinfo/yaesu
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Yaesu at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html