[Yaesu] FT-2000 running on 12v DC

[David VE3VID]

Yup........I mean the socket, not the cable.  So when I unplug the cable from the rear PS unit of the FT2K, I can then plug it into a socket which I will wire up to my 12vDC RigRunner bus.


> From: kb0nly at mchsi.com
> To: ve3vid at hotmail.com
> Subject: Re: [Yaesu] FT-2000 running on 12v DC
> Date: Thu, 18 Nov 2010 11:32:20 -0600
> 
> You mean the DC power cord right?  Easy to find those, any Yaesu dealer has 
> them, alternatively they are also available on eBay as well.  Looking at 
> $10-$20 for a good premade one.  The plug itself I think you could source 
> from Digi-Key or Mouser as it’s a Molex type, but once you buy the shell, 
> the crimps, and add shipping, your better off just buying a complete one 
> that someone else made.
> 
> 73,
> 
> Scott KB0NLY
> 
> 
> 
> -----Original Message----- 
> From: David VE3VID
> Sent: Thursday, November 18, 2010 11:06 AM
> To: Yaesu listserver
> Subject: [Yaesu] FT-2000 running on 12v DC
> 
> 
> 
> 
> 
> 
> Does anyone know here I can get one of the white plastic DC sockets like the 
> one on the back of my FT-2000?
> My station is off the grid running solar power into deep cycle batteries, so 
> everything needs to run off 12vDC.
> David
> 
> 
>      VE3VID          Located in rural Canada
> Solar power.  Wood heat.
> Mosley tribander @ 22m
> 2element delta-quad on 40m
> Lots of space for dipoles,
> bears and wolves......73
> 
> http://www.ve3vid.webs.com/
> 
> 
> 
> 
> ______________________________________________________________
> Yaesu mailing list
> Home: http://mailman.qth.net/mailman/listinfo/yaesu
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Yaesu at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html 
>