[Yaesu] re setting drag on main tuning knob of FT-1000D

[Bill Gillenwater]

Having trouble finding the archive directions to do this.  The fix is not
too difficult, without adding washers or buying special washers. I just
can't find the step-by-step directions to doing it. It worked fine for me
and the VFO was pretty loose before I corrected it.

73 Bill K3SV

----- Original Message ----- 
From: "Fern Rivard" <crc at cyberlink.bc.ca>
To: "YAESU List" <yaesu at mailman.qth.net>
Sent: Saturday, January 03, 2009 10:02 PM
Subject: [Yaesu] re setting drag on main tuning knob of FT-1000D


How does one set the drag on the main tuning knob of the FT-1000D? Mine is
too free wheeling on the main pto but fine on the vfo B. I see that there's
a spring and plastic bushing in there but nothing is shown in the owners
manual as to how to set this.  Thanks from Fern


_______________________________________________
Yaesu mailing list
Yaesu at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/yaesu