[Yaesu] WTB: G-450XL and HD73 Mast Brackets (Bottom)

[Randy]

Steve:
I had the same problem and wound up adapting an old Hy-Gain/CDR rotor base
by milling some slots in it.  If all else fails you might be able to do the
same by taking one to a machine shop.

Pictures:
http://www.SignalONE.com/misc/rotorbase1.jpg
http://www.SignalONE.com/misc/rotorbase2.jpg

I used the existing mounting holes to mount the base to my milling machine
and then made new slots large enough for the G-450 bolts.  Next time I would
probably just put the slots where the existing holes are.

de Randy, W7HR
Port Orchard, WA



******************************************



-----Original Message-----
From: yaesu-bounces at mailman.qth.net [mailto:yaesu-bounces at mailman.qth.net]
On Behalf Of Steve Harrison
Sent: Sunday, September 17, 2006 10:14 AM
To: yaesu at mailman.qth.net
Subject: [Yaesu] WTB: G-450XL and HD73 Mast Brackets (Bottom)

Need the bottom mast mounting brackets for a Yaesu G-450XL and Alliance
HD73; anybody have? Anybody know whether either are common with any other
model rotors?

Also, I may have an extra G-450XL control box available; any interest?

Thanks,
SteveH