[Yaesu] G-1000DXA Rotator

[Glen Zook]

It may be in the connector at the control box end. 
This is a 6 pin "Jones" type.  Try using a pair of
needle nose pliers and rotate the pins about 10 to 15
degrees and then plug it back in.  This is an "old
trick" that was used on the tube type commercial FM
units that used the Jones plugs to correct problems
when the sockets started loosing tension.

Glen, K9STH


--- Jerry K <w5kp at direcway.com> wrote:

The antenna rotates just fine, but the control
indicator either doesn't move, or sometimes on
power-up takes off in some wild direction on its own
(while the antenna is actually not moving).

Glen, K9STH

Web sites

http://home.comcast.net/~k9sth
http://home.comcast.net/~zcomco


	
		
__________________________________ 
Celebrate Yahoo!'s 10th Birthday! 
Yahoo! Netrospective: 100 Moments of the Web 
http://birthday.yahoo.com/netrospective/