[Yaesu] re cw filter for FT-1000D

Thu, 25 Mar 2004 21:06:30 +0100

Hello Fern,

I replaced the two standard Yaesu 2400 filters for Inrad 2800 Hz filters.
This gave me excellent results in both RX and TX!

The standard Murata K13 ceramic 2400 Hz filter in the second receiver I
replaced for the Inrad 2800 Hz filter. I am also planning to replace the 600
Hz CW filter in the second receiver with an Inrad 400 or 1000 Hz filter. The
only problem is where to install a second wire-in filter...

73, Hans Remeeus.
Ham Radio: PA1HR
www.remeeus.nl

Communication is about people, the rest is technology.

----- Original Message -----
From: "Fern Rivard" <[email protected]>
To: <[email protected]>
Sent: Wednesday, March 24, 2004 8:00 AM
Subject: [Yaesu] re cw filter for FT-1000D

>     I'm thinking of getting a cw filter for the second receiver in my
> FT-1000D. Anyone have either the stock Yaesu 600hz filter (XF-455M) or
> the 400hz Internation Radio cw filter.
>     I have a query as to which is the primary filter used on ssb
> transmit for the FT-1000D and has anyone tried replacing it with an
> after market unit such as the International Radio sub (if they do have
> one) as I find that the stock filters don't appear to be too symmetrical
> in response.
>     73 from Fern
>
>
>
> Moderator: Ray Brown, KB�STN
> _______________________________________________
> Yaesu mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/yaesu