[Yaesu] FT-920

[Bud Garside]

Hi Jim,

The flashing display is indicating that the PLL is unlocked. This symptom
often responds (as you have experienced) by going away for a while when
the set is turned off and then back on rapidly. 

Bud Garside, W7ARS
Amateur Radio Service / ARS
Portland Oregon, (503) 554-8831
   
On Fri, 2 Jan 2004 22:55:08 -0000 "Jim Hargrave" <w5ifp@gvtc.com> writes:
> 
> My FT-920 has developed a minor problem that I can't resolve.
> 
> When I initially turn the power on, the Main (VFO-A) frequency 
> display
> blinks off & on. All other displays are normal, however at this 
> point the
> radio is silent and will not operate. I can turn the radio off and 
> quickly
> back on again and all is normal.
> 
> I assume this is some kind of error msg, but i cant find anything in 
> the
> user manual that addresses this condition. Perhaps I have placed it 
> in some
> mode it don't like.
> 
> A new memory backup battery did not fix the problem. If anyone else 
> has
> experienced this, I would appreciate knowing of the solution to 
> correct it.
> I do not have a service manual. Perhaps someone with one could see 
> if this
> condition is covered in the troubleshooting.
> 
> Thanks,
> 
>   <>--------------<>
>   < 73's Jim W5IFP >
>   <>--------------<>
> 
> 
> 
> 
> 
> Moderator: Ray Brown, KB�STN
> _______________________________________________
> Yaesu mailing list
> Yaesu@mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/yaesu
> 
>