[Yaesu] FT-1000D Problem

[H. Dave Meitzen]

Tried the reset -- etc. I don't think the unit gets far enough to start
the processor. All I see is the S meter light come on and some internal
relay clatters as long as the power switch is on. I removed the skins
and the clattering relay is in the tuner section under the tuner coil
switch assembly. Still looking for ideas.
Thanks
Dave


Sent: Sunday, May 18, 2003 8:48 AM
To: yaesu@mailman.qth.net
Subject: [Yaesu] FT-1000D

Suggest that the first thing you may want to do is a processor
reset.  There's a key combination in the manual, or I prefer to just
shut off the memory battery for about 30 min to guarantee a complete
reset.  See what happens, and good luck.
Dave
WA0ZZG

I recently moved the QTH. I packed the 1000D well and brought it to the
new QTH. Well -- something happened. When I turn it on I hear a relay
clicking constantly -- sounds like it is coming from the antenna tuner.
The display does not light. The S Meter light comes on OK. I removed the
covers and looked to see if any connectors are loose. None were. I have
not attempted to do anything above the visual inspection as yet. I
thought I would poll the reflector before I started digging into it. I
do have the service manual -- it is no help trouble shooting -- at lease
it has the schematics. Let me know your thoughts.


Moderator: Ray Brown, KB=D8STN
_______________________________________________
Yaesu mailing list
Yaesu@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/yaesu