[Yaesu] Yaesu Rotator G-800 SDX Connectors

[Robin Midgett]

I ran into this years ago.
Decided to remedy the situation by installing a standard connector on the=20
rotor and cable; I used a 5 pin (I think) mic connector.
It has been in service for 8+ years, no problem. WX proofed, of course. Had=
=20
to cut out a small aluminum plate to mount the rotor connector in; no big=
 deal.
You might also consider a trailer light connector; they are robust for the=
=20
job and are cheap and easy to acquire. Install a plate in the rotor base=20
with a grommet to bring the pig tail out, seal with silicone if necessary.



At 09:42 PM 1/29/2003 -0500, SGalonski1@aol.com wrote:
>Does any one have an extra set of cable connectors or a cheaper source?=
 Yaesu
>wants ~ $60.00 for the pair.
>
>73, Stan
>KB6RQZ
>
>
>--- StripMime Report -- processed MIME parts ---
>multipart/alternative
>   text/plain (text body -- kept)
>   text/html
>The reason this message is shown is because the post was in HTML
>or had an attachment.  Attachments are not allowed.  To learn how
>to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
>
>Moderator: Ray Brown, KB=D8STN
>_______________________________________________
>Yaesu mailing list
>Yaesu@mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/yaesu

Thanks,
Robin Midgett KB4IDC
VHF+ Glutton
God Bless America. In God we trust.