[Yaesu] FT-920 memory keyer

Sun, 5 May 2002 07:53:08 -0400

I seem to recall there was a misprint in the manual for setting up the 
memory keying... when I find the source that has the correct button press 
sequence for recording I will pass it along.....

-----Original Message-----
From:	Don Flenner [SMTP:[email protected]]
Sent:	Sunday, May 05, 2002 7:45 AM
To:	[email protected]
Subject:	[Yaesu] FT-920 memory keyer

Greetings All,

The following message was sent to Yaesu with no response......

Is this a good address for Yaesu tech support? Anyone on the list have a 
920 and have any suggestions on what my problem might be. Operator error, 
rig problem, setup ???

Thanks in advance.

Don, W4YCH
Kennesaw, Georgia
http://www.qsl.net/w4ych

To: [email protected]
Subject: FT-920

Hello Yaesu,

I recently purchased a 920, I have been trying to program the memory keyer. 
I can only seem to get the first two characters into a memory bank. I press 
the REC button, then the #1 key pad, send my text. Press the play button 
and only the first couple characters are played back. What am I doing 
wrong? The directions in the manual seem pretty clear. Do I have a memory 
keyer problem?

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---
_______________________________________________
Yaesu mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/yaesu