[Yaesu] background noise

[Brian Eller]

Andrea,

The first thing I'd check is make sure that everything is grounded well.
improper grounding can cause some of that (as well as a Pandora's box of
other potential problems) That's also usually a fairly easy fix to do.


----- Original Message -----
From: "Andrea De Feo" <defandy@libero.it>
To: <yaesu@mailman.qth.net>
Sent: Sunday, March 10, 2002 12:00 PM
Subject: [Yaesu] background noise


> Hello to all
>
> I hope this message will be not a little bit off topic, but , probably
>
> could be " interesting ".
>
> I have a barand new FT1000 Mark V and a MD100 microphone. This microphone,
> unfortunately ,
>
> gets a lot of background noise, I mean when a switch my home brew linear
> amplifier on
>
> the noise of its fan probably, a little bit noisy, "enters" in the
> microphone causing some troubles
>
> you can easily immagine.
>
> So my question is is there any electronic circuit to " cut "  this noise
??
>
> Is there anybody have my same problem and have already found the solution.
>
> Any suggestion will be appreciated.
>
> 73 and best DX
>
> Andy I7DFV
>
>
> _______________________________________________
> Yaesu mailing list
> Yaesu@mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/yaesu