[Yaesu] FT-920 with Shure #444 microphone

Sun, 10 Mar 2002 12:22:21 -0500

As far as communications quality audio goes, it's hard to do better than
the shure 444. I've used it with Drake, Heathkit, and my FT-920 with
equally good results. I switched the mic impedance to high Z for the old
vacuum tube-type gear and use low Z for the FT-920. Not sure if the the
444 is still in production. However the 450 Series II, intended for
public address, is the same microphone with a straight cord and minus
the VOX switch on the bottom. The only drawback with the FT-920 is the
lack of functions available on the stock on other Yaesu mics. 

-----Original Message-----
From: [email protected] [mailto:[email protected]]
On Behalf Of PE3BB
Sent: Sunday, March 10, 2002 8:32 AM
To: [email protected]
Subject: [Yaesu] FT-920 with Shure #444 microphone

Has anyone any expierence with a shure #444 magnetic desktop microphone
in combination with the FT-920?

73's
Bart
PE3BB

--- StripMime Report -- processed MIME parts --- multipart/mixed
  text/plain (text body -- kept)
  application/ms-tnef
---
_______________________________________________
Yaesu mailing list
[email protected] http://mailman.qth.net/mailman/listinfo/yaesu