[Yaesu] mike

Wed, 23 Jan 2002 07:53:52 -0500

When power modules go bad, they usually go bad all the way..... no power
out.

If you have 18 watts on high power, then the control circuit is more
suspect.

Especially if the low power output is correct.  Look for a bad control
voltage into the module.  For the typical SAV-17 modules, the control
voltage is about 8.5 volts for high power and about 5.5 volts for low
power, 5 watts.  If it is at 12 volts or above, then the module or
something after that has failed.

Ed
K1ZOK

On Wed, 23 Jan 2002 06:12:01 -0500 JV <[email protected]> writes:
> Hi Guys
>         Has anyone replaced the power modular on a FT-5200? If so, 
> how difficult 
> is this job? The power output on mine has dropped to 18 watts on 
> high power.
>         Comments and criticism appreciated.
> JV
> 
> _______________________________________________
> Yaesu mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/yaesu
> 

________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.