[Yaesu] Reflector for FT000/D???? I also would aprreciate

Sat, 16 Feb 2002 16:14:10 -0500

John I would respond to your attack on me saying I don't know how to use a
radio which I do thank you... but I will not get into this kind of stuff on
the reflector.

 If you want to respond to the feedback of what I ask about I welcome that..
if not go post on the Icom reflector because your biased response gives you
away. You might own a Yaesu hand held Hi Hi but then again I guess you could
get by with calling your self a Yaesu fan with that, hi hi..LOL!!! I will
not answer you again so please don't bother flaming me....Enough said and
thanks to those who have responded to the question asked either directly or
on the YAESU reflector. 73, Steve, NX1G

----- Original Message -----
From: "John Bolduc" <[email protected]>
To: <[email protected]>
Sent: Saturday, February 16, 2002 3:41 PM
Subject: Re: [Yaesu] Reflector for FT000/D???? I also would aprreciate

> Hi
>
> When you compare receiver audio the Pro wins hands down. The pro has the
> ability to hear from 100 to 3.6k  ....... the FT- 1000 has narrow ssb
> crystal filters that are setup for contesters and are about 2.3k wide
total
> with an effective audio response of only 300 to 2.6k at the -6db points on
> Xmit or receive depending on the carrier point alignment on that
particular
> rig...I have had a measured both and the Icom has superior fidelity !!!
You
> need to learn how to use the pro's digital filter !! And that is coming
from
> a loyal yaesu man
>
> 73's John
>
>
> _______________________________________________
> Yaesu mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/yaesu
>