[RE: [Yaesu] Adjustment?]

Sun, 10 Feb 2002 11:17:56 -0700

This procedure definitely does not have anything to do with the carrier
adjustment points of either the USB or LSB settings. The only way to adjust
those is to physically adjust the respective trimmers in the front panel of
the radio. Best of 73's from Fern VE7GZ

----- Original Message -----
From: Kevin Jacobson <[email protected]>
To: <[email protected]>
Sent: Saturday, February 09, 2002 12:45
Subject: Re: [RE: [Yaesu] Adjustment?]

> This is a new one for me, too.
>
> I checked both of my FT-1000D's, and as Bruce - W8FU said, I get
> a value of -2.21.
>
>
>  ............................... 73,  Kevin
>
>
>   =======================
>
>   Kevin D. Jacobson, KD1J
>   27 Ridge Road
>   Wallingford, CT.  06492
>   County:       New Haven
>   Grid Locator:    FN31nl
>   e-Mail:    [email protected]
>   Web:   www.qsl.net/kd1j
>   =======================
>
> ---------------------------------------------------------------------
>
>
> Jim Clark <[email protected]> wrote:
> > Bruce-
> > The best way to tell what you are doing is to have a separate receiver
> > to monitor your signal while you change settings on the offset. Minus(-)
> > gives emphasis to lows and plus(+) the highs. Sort of like the if shift
> > on receive but for your transmit.
> > Then get some on the air comments with different settings.
> >
> > 73
> > Jim, N5QL
> >
> > -----Original Message-----
> > From: [email protected] [mailto:[email protected]]
> > On Behalf Of Bruce McLaughlin
> > Sent: Saturday, February 09, 2002 12:03 PM
> > To: Yaesu
> > Subject: [Yaesu] Adjustment?
> >
> > After many years of 1000D ownership, I had a qso with someone today
> > who happened to mention that the carrier offset could be adjusted on
> > my rig by pressing the fast and packet buttons together.  Sure
> > enough, doing so caused the frequency display to be replaced
> > by -2.21.  This function was not mentioned anywhere in my owners
> > manual.
> >
> > So being a cautious fellow at heart I wonder if anyone could tell me
> > whether this can indeed adjust the carrier offset.  If so, what will
> > be the likely effect?  Any information about this will be
> > appreciated.
> >
> > I understand whatever I might do can be easily returned to the
> > default but before I consider any tweaking I would like to know more
> > about what I'm doing.  Incidentally, I used the 1000D with a Heil 10
> > D mike.  I've always received good audio reports but I may want to
> > obtain a slightly more "mellow" sound without going overboard.
> >
> > Bruce - W8FU
> >
> >
> > _______________________________________________
> > Yaesu mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/yaesu
> >
> >
> > _______________________________________________
> > Yaesu mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/yaesu
>
>
> ____________________________________________________________________
> Get free e-mail and a permanent address at http://www.amexmail.com/?A=1
> _______________________________________________
> Yaesu mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/yaesu
>