[Wswss] More stuff FS...cleaning out a whole lot...

[Jack/NA7RF]

1st 15 items
------------------------------------------------------------------------

I have the following for sale:



1)      New 15.36MHz TCXO and documentation for the K0VXM weak signal
source. $2.00



2)      NARDA 4323-3 2-6GHz 3-way power divider, SMAs on all ports. $7.00



3)      EMCO CL-1020-20 20db directional coupler. I believe this is
Ku-band since it came out of an old TV sat uplink system. Likely useful
on 10GHz. SMAs on all ports. $5.00



4)      Applied Research 20db pad. BNC male in/BNC female out. Spec'ed
to 1GHz. $3.00



5)      Alan 13db pad, like #4.$3.00



6)      AEL 3db pad, like #4. $3.00



7)      AEL 3db pad, like #4. $3.00



8)      CINOX TCXO, model T-298, on 69.5MHz. From Ku-band sat uplink IF
board. $15.00



9)      Package of 5 Voltronics "Shuttle-Trim" capacitors, p/n CPA2.
Value unknown. $3.00



10)   New NTE-658 10MHz crystal in HC-18 case. $5.00



11)   KK7B 2160PCB 2140-2380 LO multiplier/amplifier board with 3 MMICs
which, I think, are the right ones (MAR-1, MAR-2 and MSA-0485). Chip
coupling and bypass caps mounted on the board already. I have docs
somewhere and will include if I can find them. $7.00



12)   Two International Crystal OE-10 crystal oscillators: One on
3.62000MHz and the other on 3.64000MHz. Possibilities for receiver
testing? $12.00 for the pair.



13)   DEMI TIB transverter interface. Purchased as part of a lot of gear
and I have never used it.  I did determine that the PC-mount coax relay
was bad and that has been replaced. Mounted in an ugly aluminum case
with required connectors for essential functions (SO-239s for Radio/HF
Ant, RCAs for +12v/PTT out/PTT in, BNCs for RX IF/TX IF and an on/off
toggle switch. ALC function has not been tested. $20.00



14)   Twelve new NEC NE-02135 transistors (micro-X package) with docs. $8.00





15)   DEMI PINK(?) interface unit. This is the one that converts
transverters with a 2-meter IF to a 10-meter IF. This was also part of
the same lot of gear as #13. RF had gotten into the receive side front
end and roasted the MMIC, PIN diode, coupling capacitor and a bit if the
PC board. That has all been replaced and seems to work okay. Mounted in
a cast aluminum box (no cover) with necessary connectors to use as a
receive converter. The transmit side has, apparently, never been wired
to connectors. $25.00



Add shipping from 89429 on all items.


Thanks,


Jack, NA7RF