[WSWSS] FS

[Shawn Tayler]

Hi Jack,

I'll take it all.  If you can meet me Hows $180 cash sound.

Shawn
N7LQ

On Sat, 11 Oct 2003 11:55:45 -0700 W7PW <vhfplus@bmg50.com> professed:

> Here are a few things for sale. Some of these items came out of an 
> operating Harris L-to-Ku-band upconverter shelf:
> 
> 1) MACOM brick oscillator model PLL14-04, requiring an external 
> reference and +20-volts DC. I have retuned the brick to about 1152MHz on 
> a spectrum analyzer but I have no reference source (a x10 multiplication 
> scheme) so the brick just searches around 1152. +20dbm output with SMA's 
> on both output and reference input ports. $30.00
> 
> 2) Cinox model H-210 10.0MHz ovenized reference oscillator in a 2x2x4 
> inch metal can with "L" mounting bracket. Output is an SMA connector and 
> it requires +24-volts. DC connections are on solder terminals. $20.00
> 
> 3) EMCO CL-1020-20 20db directional coupler. SMA's on all 3 ports. I 
> believe this will be okay at 1296MHz but I have no way to test. $5.00
> 
> 4) AEROCOM model 1916 isolator in a 1-1/2x1-1/2x5/8-inch package. SMA's 
> on both input and output ports. Power handling capability unknown, but 
> probably no more than 10-watts. $7.00
> 
> 5) 6-pole BP filter for 3456. Originally a California Microwave filter 
> for "C" band, retuned on a network analyzer for 3456, with isolators and 
> SMA connectors at both input and output ports. 50MHz bandwidth at -10db 
> points, 3.16db insertion loss and 24.9db return loss. $15.00
> 
> 6) New Watkins-Johnson M-14 DBM, SMA's at all ports, spec'ed at RF: 
> 4-8GHz, LO: 4-9GHz @ +7dbm, IF: DC-2GHz. I bought this from WA6KBL 
> several years ago and never used it...he tested it and referred to the 
> DBM as "excellent". I believe the DBM will be useable at 10GHz, which is 
> why I obtained it originally. $50.00
> 
> 7) ANZAC MDC-169 load insensitive DBM, SMA's at all ports. The ANZAC 
> spec's show the RF/IF ports good to 3.5GHz, +7dbm 1db compression point 
> on the RF port, the LO port 5 to 1500MHz with +10dbm drive. $25.00
> 
> 8) ANZAC T-1000 10-1000MHz 2-way power divider, max 2.5-watt input and 
> 0.5-watt internal load dissipation. Isolation >25db, amplitude balance 
> <0.2db and phase balance <2-degrees. Might be good for your DC receiver 
> for 902! $10.00
> 
> 10) DEMI LO-LV, low-voltage LO PC board and 93.000MHz crystal. This is 
> the KK7B LO board and will give you 558MHz out to drive a 5760 
> transverter with 2396 IF. I've built one and it works great, giving 
> +11dbm out with spurs down >25db. $10.00 for both the PC board (with 
> documentation) and crystal.
> 
> 11) Sivers Lab PM-7520 crystal detector. Good to 18GHz, male SMA in and 
> female BNC out. $15.00
> 
> 12) RS Microwave Company 9-pole BP filter for "L"-band, SMA's in and 
> out. This came out of the L/Ku upconverter and operated around 1050MHz. 
> Don't know if it can be retuned since all tuning and coupling screws 
> seem to be cut and sealed. $5.00
> 
> Add shipping cost for all items.
> 
> Thanks and 73,
> 
> Jack, W7PW
> 
> _______________________________________________
> WSWSS mailing list
> WSWSS@mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/wswss
>