[WRL] Globe Champion 300A

[William Laakkonen]

Wasn't that a glow-in-the dark paint on the panel of most of the Globe
transmitters? If not, then it might be a nice touch to add it using
something like this:

http://www.readysetglo.com/ - they make a glow-in-the-dark powder which you
may add to the paint you are screening with. 

73
Bill Laakkonen
N4BKT
 

-----Original Message-----
From: wrl-bounces at mailman.qth.net [mailto:wrl-bounces at mailman.qth.net] On
Behalf Of Jim Wilhite
Sent: Tuesday, December 26, 2006 10:22 AM
To: WRL Mailing list
Subject: [WRL] Globe Champion 300A

Recently I acquired a Globe Champion 300A that was 
electrically in good condition.  But the case and panel had 
scratches and surface rust on them.

I decided to do something about the cosmetic problems and 
make the rig look good.  So I had a graphic artist do a file 
of the panel and had a screen made of it.  A friend of mine 
then took the screen and panel to strip and re-screen.

Therefore if you have a 300A and wish to have the panel 
repainted and screened, he will do it for you.  The fonts 
are near the original and the art work is good.  The ink for 
the lettering will be white because the light green ink is 
not available.

He does the panel in a high quality paint with a clear coat 
and it shines like a new dollar.  So if you want to have 
your panel redone, email me and I will give you the contact 
information for the man.

73  Jim
W5JO 


_______________________________________________
WRL mailing list
WRL at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/wrl