[WIARC] Thanks for ideas and comments.

[Dana Myers]

http://www.richardsonrfpd.com/resources/RellDocuments/SYS_18/PolyPhaser.pdf

See page 10 of this catalog.

Polyphaser makes a protection device that panel mounts.   Then you only need 
one grounded panel.

I have used them for years in the broadcast business for receive antenna 
feeds and very low power systems.

All the best,  Dana       NA9DM

-----Original Message----- 
From: Brandon Wiewel
Sent: Friday, January 09, 2015 3:18 PM
To: Chris Schulz ; WIARC Reflector
Subject: Re: [WIARC] Thanks for ideas and comments.

To unsubscribe or make changes to your personal setting for the WIARC list, 
please go to http://mailman.qth.net/mailman/listinfo/wiarc


Chris, What about putting 90 deg connectors on the coax from the antenna.

-----Original Message-----
From: WIARC [mailto:wiarc-bounces at mailman.qth.net] On Behalf Of Chris Schulz
Sent: Friday, January 09, 2015 1:45 PM
To: WIARC Reflector
Subject: [WIARC] Thanks for ideas and comments.

To unsubscribe or make changes to your personal setting for the WIARC list, 
please go to http://mailman.qth.net/mailman/listinfo/wiarc


I will just have to get panel connectors and add 90 degree connector. I 
still need to do the lightning protection. I am going to add these to the 
1/4" thick aluminum plate at the back of the house. This is where the coax 
leaves the house from the basement. I am soon going to add this lightning 
protection with grounding rods to this aluminum plate. This makes two panels 
to pass through now. Hope this does not add up on the loss side of things to 
much.

Thanks,
Chris - NR9Q
______________________________________________________________
WIARC mailing list
Home: http://mailman.qth.net/mailman/listinfo/wiarc
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:WIARC at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Confidentiality Notice: This electronic message, including any attachments, 
is for the sole use of the intended recipient(s) and may contain 
confidential and/or privileged information. Any unauthorized review, use, 
disclosure or distribution is prohibited. If you are not the intended 
recipient, please contact the sender via telephone, facsimile, or reply 
e-mail and destroy all copies of the original message, including any 
attachments.
______________________________________________________________
WIARC mailing list
Home: http://mailman.qth.net/mailman/listinfo/wiarc
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:WIARC at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html