[WIARC] Heathkit bandswitch parts

[Michael Nowack]

Is he looking for parts for the input circuit wafer or the tank circuit
wafer?  The same shaft actuates both wafers with the input wafer on the
outside of the HV cage and the output wafer on the inside.  However, they
are different size wafers.

Mike

-----Original Message-----
From: WIARC [mailto:wiarc-bounces at mailman.qth.net] On Behalf Of Danny Pease
Sent: Saturday, December 05, 2015 10:31 AM
To: wiarc at mailman.qth.net
Subject: [WIARC] Heathkit bandswitch parts

To unsubscribe or make changes to your personal setting for the WIARC list,
please go to http://mailman.qth.net/mailman/listinfo/wiarc


John Allen, N0JA, is looking for a couple of contacts for an amplifier
bandswitch he is needing to repair. The amp is a Heathkit SB-200, I think it
used the same switch as many other Heathkit amps. If you have anything that
John might be able to use, let me know and I will get you in contact with
John.

Danny NG9R

______________________________________________________________
WIARC mailing list
Home: http://mailman.qth.net/mailman/listinfo/wiarc
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:WIARC at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html