[W8MWA] How to set NanoVNA trace 0 to show CH0 Reflect

[Jan Ditzian]

NanoVNA

Setting Trace 0 to show CH0 Reflect


All instructions assume that you have turned the NanoVNA on with the slide
switch at the top.



   1.

   Press the button on the top of the NanoVNA to see the *Main Menu* showing*
   Trace, Format, Scale ….*
   2.

   If another menu appears, tap *Back*, at the bottom of the menu and
   continue tapping Back until you see the *Main Menu*
   3.

   Select *Display*
   4.

   Select *Trace*
   5.

   Tap *Trace 0* repeatedly until the check mark shows at the left of
the *Trace
   0* label
   6.

   Tap *Back* until you see the *Main Menu*
   7.

   Tap *Display*
   8.

   Tap* Channel*
   9.

   *Tap CH0 Reflect until the check mark shows at the left of the *CH0 label
   10.

   Now *T**race 0* will show what is happening at *CH0*, also called S11
   (this is a yellow line
   11.

   Turn this trace on or off by returning to the *Trace* menu and
tapping *Trace
   0* until the check mark appears (on) or disappears (off)




   11.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/w8mwa/attachments/20250916/34ac1108/attachment.html>