[W8MWA] Baofeng UV-5R menu table

[Jan Ditzian]

Baofengers (aka Pofungers):

I found a PDF table with all the Baofeng UV-5R commands.  It is 
wonderful, and will allow you to set the UV-5R using the keypad. Just 
remember the *command **initiation sequence*, press:

 1. Menu
 2. One or two digit code for the *selection* you want to change
 3. Menu
 4. Digit(s) to select the *choice* you want for the selection
 5. Menu
 6. Exit

Do not rush this procedure until you are familiar with it.  I would 
recommend that the first selection you set be Keypad *BEEP*, menu 
selection 8, choice 1.  With BEEP on, you can be sure whether or not the 
radio recognized that you pressed a key.  This selection is also a good 
way to check that you know how to follow the procedure--you can turn the 
beep on, then turn it off.  Leave it on for the actual operation to make 
other changes.

http://kc9hi.dyndns.org/uv5r/programming/UV-5R%20Menus.pdf

Can't get CHIRP to work because you have one of the early programming 
cables with the rip-off chip?  We don' need no stinkin' CHIRP!

Jan, KX2A

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/w8mwa/attachments/20161023/8edcecdb/attachment.html>