From vintage-audio@mailman.qth.net  Sat Jan  4 18:01:00 2003
From: vintage-audio@mailman.qth.net (Luca Rossi)
Date: Sat Jan  4 18:01:00 2003
Subject: [Vintage-Audio] Valve data manual book wanted
Message-ID: <004b01c2b3ef$d1805780$9481623e@j0s3f9>

Hi to all the list's members,
I am looking for this book: "AVO valve data manual", edition higher than
21°, no copy or CD.
I can pay via Western Union.

Best regards and happy New Year from Italy,
** Luca Rossi **
chopin.i@inwind.it
http://www.geocities.com/chopin.i/


From vintage-audio@mailman.qth.net  Sat Jan  4 18:31:02 2003
From: vintage-audio@mailman.qth.net (Duane Fischer, W8DBF)
Date: Sat Jan  4 18:31:02 2003
Subject: [Vintage-Audio] Valve data manual book wanted
Message-ID: <200301042328.h04NSOW32340@hades.usol.com>

The question is, why? Is there some specific question you need an answer to?
Perhaps if we knew the issue, we could assist you more easily.	
	
Duane Fischer, W8DBF	


----------
From: Luca Rossi <chopin.i@inwind.it>
To: Undisclosed-Recipient:;@mailman.qth.net;;
Subject: [Vintage-Audio] Valve data manual book wanted
Date: Saturday, January 04, 2003 7:46 AM

Hi to all the list's members,
I am looking for this book: "AVO valve data manual", edition higher than
210, no copy or CD.
I can pay via Western Union.

Best regards and happy New Year from Italy,
** Luca Rossi **
chopin.i@inwind.it
http://www.geocities.com/chopin.i/

_______________________________________________
Home: http://mailman.qth.net/mailman/listinfo/vintage-audio
List Administrator: Duane Fischer, W8DBF
** For Assistance: dfischer@usol.com ** 

From vintage-audio@mailman.qth.net  Sat Jan  4 20:05:01 2003
From: vintage-audio@mailman.qth.net (Luca Rossi)
Date: Sat Jan  4 20:05:01 2003
Subject: [Vintage-Audio] Valve data manual book wanted
References: <200301042328.h04NSOW32340@hades.usol.com>
Message-ID: <002401c2b456$20b4c460$d238623e@j0s3f9>

Hi Duane,
I am looking for this book only to use it with my AVO tube tester.
I like to have a modern reference book for this, so I have asked for an
edition >21
Finally, I am first of all a book collector, and for this reason I have
asked for an original one.

Regards,
** Luca Rossi **
chopin.i@inwind.it
http://www.geocities.com/chopin.i/

-----Messaggio Originale-----
Da: Duane Fischer, W8DBF
A: vintage-audio@mailman.qth.net ;
Undisclosed-Recipient:;@mailman.qth.net;;;
Data invio: domenica 5 gennaio 2003 0.25
Oggetto: Re: [Vintage-Audio] Valve data manual book wanted


The question is, why? Is there some specific question you need an answer to?
Perhaps if we knew the issue, we could assist you more easily.

Duane Fischer, W8DBF


From vintage-audio@mailman.qth.net  Sat Jan  4 21:12:01 2003
From: vintage-audio@mailman.qth.net (Duane Fischer, W8DBF)
Date: Sat Jan  4 21:12:01 2003
Subject: [Vintage-Audio] Valve data manual book wanted
Message-ID: <200301050209.h0529FW09871@hades.usol.com>

Hmmm. Might be a tough one to lay hands on. You might try posting your 'want' on
the HCI web site in the 'forsale-swap' area. A lot of people read it, you might
get lucky.	
	
Duane W8DBF	


----------
From: Luca Rossi <chopin.i@inwind.it>
To: vintage-audio@mailman.qth.net
Subject: Re: [Vintage-Audio] Valve data manual book wanted
Date: Saturday, January 04, 2003 8:02 PM

Hi Duane,
I am looking for this book only to use it with my AVO tube tester.
I like to have a modern reference book for this, so I have asked for an
edition >21
Finally, I am first of all a book collector, and for this reason I have
asked for an original one.

Regards,
** Luca Rossi **
chopin.i@inwind.it
http://www.geocities.com/chopin.i/

-----Messaggio Originale-----
Da: Duane Fischer, W8DBF
A: vintage-audio@mailman.qth.net ;
Undisclosed-Recipient:;@mailman.qth.net;;;
Data invio: domenica 5 gennaio 2003 0.25
Oggetto: Re: [Vintage-Audio] Valve data manual book wanted


The question is, why? Is there some specific question you need an answer to?
Perhaps if we knew the issue, we could assist you more easily.

Duane Fischer, W8DBF

_______________________________________________
Home: http://mailman.qth.net/mailman/listinfo/vintage-audio
List Administrator: Duane Fischer, W8DBF
** For Assistance: dfischer@usol.com ** 

From vintage-audio@mailman.qth.net  Sun Jan  5 06:58:01 2003
From: vintage-audio@mailman.qth.net (Luca Rossi)
Date: Sun Jan  5 06:58:01 2003
Subject: [Vintage-Audio] Valve data manual book wanted
References: <200301050209.h0529FW09871@hades.usol.com>
Message-ID: <005c01c2b4b1$7662e940$0b97623e@j0s3f9>

Hi Duane,
and thank you again for your reply.

Could you please tell me the url of that web site?

Regards,
** Luca Rossi **
chopin.i@inwind.it
http://www.geocities.com/chopin.i/

-----Messaggio Originale-----
Da: Duane Fischer, W8DBF
A: vintage-audio@mailman.qth.net
Data invio: domenica 5 gennaio 2003 3.05
Oggetto: Re: [Vintage-Audio] Valve data manual book wanted


Hmmm. Might be a tough one to lay hands on. You might try posting your
'want' on
the HCI web site in the 'forsale-swap' area. A lot of people read it, you
might
get lucky.

Duane W8DBF



From vintage-audio@mailman.qth.net  Sun Jan  5 17:50:01 2003
From: vintage-audio@mailman.qth.net (Duane Fischer, W8DBF)
Date: Sun Jan  5 17:50:01 2003
Subject: [Vintage-Audio] Valve data manual book wanted
Message-ID: <200301052247.h05MlOW10801@hades.usol.com>

http://www.w9wze.org	


----------
From: Luca Rossi <chopin.i@inwind.it>
To: vintage-audio@mailman.qth.net
Subject: Re: [Vintage-Audio] Valve data manual book wanted
Date: Sunday, January 05, 2003 6:55 AM

Hi Duane,
and thank you again for your reply.

Could you please tell me the url of that web site?

Regards,
** Luca Rossi **
chopin.i@inwind.it
http://www.geocities.com/chopin.i/

-----Messaggio Originale-----
Da: Duane Fischer, W8DBF
A: vintage-audio@mailman.qth.net
Data invio: domenica 5 gennaio 2003 3.05
Oggetto: Re: [Vintage-Audio] Valve data manual book wanted


Hmmm. Might be a tough one to lay hands on. You might try posting your
'want' on
the HCI web site in the 'forsale-swap' area. A lot of people read it, you
might
get lucky.

Duane W8DBF


_______________________________________________
Home: http://mailman.qth.net/mailman/listinfo/vintage-audio
List Administrator: Duane Fischer, W8DBF
** For Assistance: dfischer@usol.com ** 

From vintage-audio@mailman.qth.net  Mon Jan  6 15:14:00 2003
From: vintage-audio@mailman.qth.net (Luca Rossi)
Date: Mon Jan  6 15:14:00 2003
Subject: [Vintage-Audio] Valve data manual book wanted
References: <200301052247.h05MlOW10801@hades.usol.com>
Message-ID: <003801c2b5bf$df9ec320$bef3623e@j0s3f9>

Thank you!

** Luca Rossi **
chopin.i@inwind.it
http://www.geocities.com/chopin.i/

-----Messaggio Originale----- 
Da: Duane Fischer, W8DBF 
A: vintage-audio@mailman.qth.net 
Data invio: domenica 5 gennaio 2003 23.26
Oggetto: Re: [Vintage-Audio] Valve data manual book wanted


http://www.w9wze.org 


From vintage-audio@mailman.qth.net  Tue Jan  7 14:54:00 2003
From: vintage-audio@mailman.qth.net (Rick Gouge  VE7RiK)
Date: Tue Jan  7 14:54:00 2003
Subject: [Vintage-Audio] Revox a77 help needed.
Message-ID: <003301c2b686$24af8230$a6acf4cc@w7u7f7>

My revox will fast forward and rewind but it will not play. It work fine
when i put it away a year or so ago. now it does not. The capstand motor
does not work at all. Any hints for would be helpful. Thankyou for you time.
Rick



From vintage-audio@mailman.qth.net  Tue Jan  7 16:01:04 2003
From: vintage-audio@mailman.qth.net (JM/CO)
Date: Tue Jan  7 16:01:04 2003
Subject: [Vintage-Audio] Revox a77 help needed.
References: <003301c2b686$24af8230$a6acf4cc@w7u7f7>
Message-ID: <00d701c2b68f$a4bb1da0$e879d63f@net>

There are several possible causes for this, but first, I would go looking at
the things that might have been effected by storage. Relay and switch
contacts, especially if the thing was in a moisture prone situation, or
stored where heating / cooling cycles occurred.
Chuck N1LNH
----- Original Message -----
From: "Rick Gouge VE7RiK" <ve7rik@midbc.com>
To: <vintage-audio@mailman.qth.net>
Sent: Tuesday, January 07, 2003 2:51 PM
Subject: [Vintage-Audio] Revox a77 help needed.


> My revox will fast forward and rewind but it will not play. It work fine
> when i put it away a year or so ago. now it does not. The capstand motor
> does not work at all. Any hints for would be helpful. Thankyou for you
time.
> Rick
>
>
> _______________________________________________
> Home: http://mailman.qth.net/mailman/listinfo/vintage-audio
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer@usol.com **


From vintage-audio@mailman.qth.net  Tue Jan  7 18:28:00 2003
From: vintage-audio@mailman.qth.net (Rick Gouge  VE7RiK)
Date: Tue Jan  7 18:28:00 2003
Subject: [Vintage-Audio] Revox a77 help needed.
References: <003301c2b686$24af8230$a6acf4cc@w7u7f7> <00d701c2b68f$a4bb1da0$e879d63f@net>
Message-ID: <001301c2b6a3$fd1f0bf0$a4acf4cc@w7u7f7>

Thankyou for the tip Chuck. I pulled the boards and clean them but not the
relays. i will do that and see what happens. Should the capstand motor be
turning all the time when the unit is turn on? Rick
----- Original Message -----
From: "JM/CO" <jmerritt2@capecod.net>
To: <vintage-audio@mailman.qth.net>
Sent: Tuesday, January 07, 2003 12:59 PM
Subject: Re: [Vintage-Audio] Revox a77 help needed.


> There are several possible causes for this, but first, I would go looking
at
> the things that might have been effected by storage. Relay and switch
> contacts, especially if the thing was in a moisture prone situation, or
> stored where heating / cooling cycles occurred.
> Chuck N1LNH
> ----- Original Message -----
> From: "Rick Gouge VE7RiK" <ve7rik@midbc.com>
> To: <vintage-audio@mailman.qth.net>
> Sent: Tuesday, January 07, 2003 2:51 PM
> Subject: [Vintage-Audio] Revox a77 help needed.
>
>
> > My revox will fast forward and rewind but it will not play. It work fine
> > when i put it away a year or so ago. now it does not. The capstand motor
> > does not work at all. Any hints for would be helpful. Thankyou for you
> time.
> > Rick
> >
> >
> > _______________________________________________
> > Home: http://mailman.qth.net/mailman/listinfo/vintage-audio
> > List Administrator: Duane Fischer, W8DBF
> > ** For Assistance: dfischer@usol.com **
>
> _______________________________________________
> Home: http://mailman.qth.net/mailman/listinfo/vintage-audio
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer@usol.com **
>



From vintage-audio@mailman.qth.net  Tue Jan  7 19:08:04 2003
From: vintage-audio@mailman.qth.net (JM/CO)
Date: Tue Jan  7 19:08:04 2003
Subject: [Vintage-Audio] Revox a77 help needed.
References: <003301c2b686$24af8230$a6acf4cc@w7u7f7> <00d701c2b68f$a4bb1da0$e879d63f@net> <001301c2b6a3$fd1f0bf0$a4acf4cc@w7u7f7>
Message-ID: <002f01c2b6a9$b98318e0$5847d63f@net>

YES-
Chuck
----- Original Message -----
From: "Rick Gouge VE7RiK" <ve7rik@midbc.com>
To: <vintage-audio@mailman.qth.net>
Sent: Tuesday, January 07, 2003 6:24 PM
Subject: Re: [Vintage-Audio] Revox a77 help needed.


> Thankyou for the tip Chuck. I pulled the boards and clean them but not the
> relays. i will do that and see what happens. Should the capstand motor be
> turning all the time when the unit is turn on? Rick
> ----- Original Message -----
> From: "JM/CO" <jmerritt2@capecod.net>
> To: <vintage-audio@mailman.qth.net>
> Sent: Tuesday, January 07, 2003 12:59 PM
> Subject: Re: [Vintage-Audio] Revox a77 help needed.
>
>
> > There are several possible causes for this, but first, I would go
looking
> at
> > the things that might have been effected by storage. Relay and switch
> > contacts, especially if the thing was in a moisture prone situation, or
> > stored where heating / cooling cycles occurred.
> > Chuck N1LNH
> > ----- Original Message -----
> > From: "Rick Gouge VE7RiK" <ve7rik@midbc.com>
> > To: <vintage-audio@mailman.qth.net>
> > Sent: Tuesday, January 07, 2003 2:51 PM
> > Subject: [Vintage-Audio] Revox a77 help needed.
> >
> >
> > > My revox will fast forward and rewind but it will not play. It work
fine
> > > when i put it away a year or so ago. now it does not. The capstand
motor
> > > does not work at all. Any hints for would be helpful. Thankyou for you
> > time.
> > > Rick
> > >
> > >
> > > _______________________________________________
> > > Home: http://mailman.qth.net/mailman/listinfo/vintage-audio
> > > List Administrator: Duane Fischer, W8DBF
> > > ** For Assistance: dfischer@usol.com **
> >
> > _______________________________________________
> > Home: http://mailman.qth.net/mailman/listinfo/vintage-audio
> > List Administrator: Duane Fischer, W8DBF
> > ** For Assistance: dfischer@usol.com **
> >
>
>
> _______________________________________________
> Home: http://mailman.qth.net/mailman/listinfo/vintage-audio
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer@usol.com **


From vintage-audio@mailman.qth.net  Tue Jan  7 20:50:01 2003
From: vintage-audio@mailman.qth.net (Duane Fischer, W8DBF)
Date: Tue Jan  7 20:50:01 2003
Subject: [Vintage-Audio] Revox a77 help needed.
Message-ID: <200301080147.h081lBW03602@hades.usol.com>

Rick, 	
	
Take your question to the 'reel to reel' list on Yahoo Egroups. There are a lot
of Revox guys who hang out there. You stand a better chance of getting help
there. This is a very reliable unit, repairs are generally quite straight
forward. 	
	
Duane Fischer, W8DBF	


----------
From: Rick Gouge  VE7RiK <ve7rik@midbc.com>
To: vintage-audio@mailman.qth.net
Subject: Re: [Vintage-Audio] Revox a77 help needed.
Date: Tuesday, January 07, 2003 6:24 PM

Thankyou for the tip Chuck. I pulled the boards and clean them but not the
relays. i will do that and see what happens. Should the capstand motor be
turning all the time when the unit is turn on? Rick
----- Original Message -----
From: "JM/CO" <jmerritt2@capecod.net>
To: <vintage-audio@mailman.qth.net>
Sent: Tuesday, January 07, 2003 12:59 PM
Subject: Re: [Vintage-Audio] Revox a77 help needed.


> There are several possible causes for this, but first, I would go looking
at
> the things that might have been effected by storage. Relay and switch
> contacts, especially if the thing was in a moisture prone situation, or
> stored where heating / cooling cycles occurred.
> Chuck N1LNH
> ----- Original Message -----
> From: "Rick Gouge VE7RiK" <ve7rik@midbc.com>
> To: <vintage-audio@mailman.qth.net>
> Sent: Tuesday, January 07, 2003 2:51 PM
> Subject: [Vintage-Audio] Revox a77 help needed.
>
>
> > My revox will fast forward and rewind but it will not play. It work fine
> > when i put it away a year or so ago. now it does not. The capstand motor
> > does not work at all. Any hints for would be helpful. Thankyou for you
> time.
> > Rick
> >
> >
> > _______________________________________________
> > Home: http://mailman.qth.net/mailman/listinfo/vintage-audio
> > List Administrator: Duane Fischer, W8DBF
> > ** For Assistance: dfischer@usol.com **
>
> _______________________________________________
> Home: http://mailman.qth.net/mailman/listinfo/vintage-audio
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer@usol.com **
>


_______________________________________________
Home: http://mailman.qth.net/mailman/listinfo/vintage-audio
List Administrator: Duane Fischer, W8DBF
** For Assistance: dfischer@usol.com ** 

From vintage-audio@mailman.qth.net  Tue Jan  7 21:44:00 2003
From: vintage-audio@mailman.qth.net (Rudy Rutenber)
Date: Tue Jan  7 21:44:00 2003
Subject: [Vintage-Audio] Looking for new Xtal phono cartridge vendor
Message-ID: <01f401c2b6bf$6bef5150$6401a8c0@rudy>

Please reply direct if you can help.
Thank you,
Rudy


From vintage-audio@mailman.qth.net  Tue Jan  7 22:27:00 2003
From: vintage-audio@mailman.qth.net (Rick Gouge  VE7RiK)
Date: Tue Jan  7 22:27:00 2003
Subject: [Vintage-Audio] Revox a77 help needed.
References: <200301080147.h081lBW03602@hades.usol.com>
Message-ID: <000e01c2b6c5$68f78660$bdacf4cc@w7u7f7>

Thankyou Duane, But i do not have time to work on this unit now. I sold the
revox thinking that it would work fine as it did the last time i put it
away. Now i think i will have to just sell it for parts so i can refund some
of the money back to the buyer. thanks again Duane. Rick
----- Original Message -----
From: "Duane Fischer, W8DBF" <dfischer@usol.com>
To: <vintage-audio@mailman.qth.net>
Sent: Tuesday, January 07, 2003 5:37 PM
Subject: Re: [Vintage-Audio] Revox a77 help needed.


> Rick,
>
> Take your question to the 'reel to reel' list on Yahoo Egroups. There are
a lot
> of Revox guys who hang out there. You stand a better chance of getting
help
> there. This is a very reliable unit, repairs are generally quite straight
> forward.
>
> Duane Fischer, W8DBF
>
>
> ----------
> From: Rick Gouge  VE7RiK <ve7rik@midbc.com>
> To: vintage-audio@mailman.qth.net
> Subject: Re: [Vintage-Audio] Revox a77 help needed.
> Date: Tuesday, January 07, 2003 6:24 PM
>
> Thankyou for the tip Chuck. I pulled the boards and clean them but not the
> relays. i will do that and see what happens. Should the capstand motor be
> turning all the time when the unit is turn on? Rick
> ----- Original Message -----
> From: "JM/CO" <jmerritt2@capecod.net>
> To: <vintage-audio@mailman.qth.net>
> Sent: Tuesday, January 07, 2003 12:59 PM
> Subject: Re: [Vintage-Audio] Revox a77 help needed.
>
>
> > There are several possible causes for this, but first, I would go
looking
> at
> > the things that might have been effected by storage. Relay and switch
> > contacts, especially if the thing was in a moisture prone situation, or
> > stored where heating / cooling cycles occurred.
> > Chuck N1LNH
> > ----- Original Message -----
> > From: "Rick Gouge VE7RiK" <ve7rik@midbc.com>
> > To: <vintage-audio@mailman.qth.net>
> > Sent: Tuesday, January 07, 2003 2:51 PM
> > Subject: [Vintage-Audio] Revox a77 help needed.
> >
> >
> > > My revox will fast forward and rewind but it will not play. It work
fine
> > > when i put it away a year or so ago. now it does not. The capstand
motor
> > > does not work at all. Any hints for would be helpful. Thankyou for you
> > time.
> > > Rick
> > >
> > >
> > > _______________________________________________
> > > Home: http://mailman.qth.net/mailman/listinfo/vintage-audio
> > > List Administrator: Duane Fischer, W8DBF
> > > ** For Assistance: dfischer@usol.com **
> >
> > _______________________________________________
> > Home: http://mailman.qth.net/mailman/listinfo/vintage-audio
> > List Administrator: Duane Fischer, W8DBF
> > ** For Assistance: dfischer@usol.com **
> >
>
>
> _______________________________________________
> Home: http://mailman.qth.net/mailman/listinfo/vintage-audio
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer@usol.com **
> _______________________________________________
> Home: http://mailman.qth.net/mailman/listinfo/vintage-audio
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer@usol.com **
>



From vintage-audio@mailman.qth.net  Wed Jan  8 03:15:00 2003
From: vintage-audio@mailman.qth.net (shadow)
Date: Wed Jan  8 03:15:00 2003
Subject: [Vintage-Audio] Revox a77 help needed.
References: <200301080147.h081lBW03602@hades.usol.com> <000e01c2b6c5$68f78660$bdacf4cc@w7u7f7>
Message-ID: <3E1BDD1F.EFCB085E@gilroy.com>

Hi....
This is not a uncommon problem. I have been down that road before, with a few of
my A77. The drive motor bearing just freeze after long storage, the oil gets
like glue. Some times it just takes a little rotation to free it or it may
require a very small amount of machine oil on the bearing faces to keep them
free.

Gary  KG6NTN
~~~~~~~~~~~~~~~~``

Rick Gouge VE7RiK wrote:

> Thankyou Duane, But i do not have time to work on this unit now. I sold the
> revox thinking that it would work fine as it did the last time i put it
> away. Now i think i will have to just sell it for parts so i can refund some
> of the money back to the buyer. thanks again Duane. Rick
> ----- Original Message -----
> From: "Duane Fischer, W8DBF" <dfischer@usol.com>
> To: <vintage-audio@mailman.qth.net>
> Sent: Tuesday, January 07, 2003 5:37 PM
> Subject: Re: [Vintage-Audio] Revox a77 help needed.
>
> > Rick,
> >
> > Take your question to the 'reel to reel' list on Yahoo Egroups. There are
> a lot
> > of Revox guys who hang out there. You stand a better chance of getting
> help
> > there. This is a very reliable unit, repairs are generally quite straight
> > forward.
> >
> > Duane Fischer, W8DBF
> >
> >
> > ----------
> > From: Rick Gouge  VE7RiK <ve7rik@midbc.com>
> > To: vintage-audio@mailman.qth.net
> > Subject: Re: [Vintage-Audio] Revox a77 help needed.
> > Date: Tuesday, January 07, 2003 6:24 PM
> >
> > Thankyou for the tip Chuck. I pulled the boards and clean them but not the
> > relays. i will do that and see what happens. Should the capstand motor be
> > turning all the time when the unit is turn on? Rick
> > ----- Original Message -----
> > From: "JM/CO" <jmerritt2@capecod.net>
> > To: <vintage-audio@mailman.qth.net>
> > Sent: Tuesday, January 07, 2003 12:59 PM
> > Subject: Re: [Vintage-Audio] Revox a77 help needed.
> >
> >
> > > There are several possible causes for this, but first, I would go
> looking
> > at
> > > the things that might have been effected by storage. Relay and switch
> > > contacts, especially if the thing was in a moisture prone situation, or
> > > stored where heating / cooling cycles occurred.
> > > Chuck N1LNH
> > > ----- Original Message -----
> > > From: "Rick Gouge VE7RiK" <ve7rik@midbc.com>
> > > To: <vintage-audio@mailman.qth.net>
> > > Sent: Tuesday, January 07, 2003 2:51 PM
> > > Subject: [Vintage-Audio] Revox a77 help needed.
> > >
> > >
> > > > My revox will fast forward and rewind but it will not play. It work
> fine
> > > > when i put it away a year or so ago. now it does not. The capstand
> motor
> > > > does not work at all. Any hints for would be helpful. Thankyou for you
> > > time.
> > > > Rick
> > > >
> > > >
> > > > _______________________________________________
> > > > Home: http://mailman.qth.net/mailman/listinfo/vintage-audio
> > > > List Administrator: Duane Fischer, W8DBF
> > > > ** For Assistance: dfischer@usol.com **
> > >
> > > _______________________________________________
> > > Home: http://mailman.qth.net/mailman/listinfo/vintage-audio
> > > List Administrator: Duane Fischer, W8DBF
> > > ** For Assistance: dfischer@usol.com **
> > >
> >
> >
> > _______________________________________________
> > Home: http://mailman.qth.net/mailman/listinfo/vintage-audio
> > List Administrator: Duane Fischer, W8DBF
> > ** For Assistance: dfischer@usol.com **
> > _______________________________________________
> > Home: http://mailman.qth.net/mailman/listinfo/vintage-audio
> > List Administrator: Duane Fischer, W8DBF
> > ** For Assistance: dfischer@usol.com **
> >
>
> _______________________________________________
> Home: http://mailman.qth.net/mailman/listinfo/vintage-audio
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer@usol.com **

--
A gun in the hand, is better then a cop on the phone.



From vintage-audio@mailman.qth.net  Wed Jan  8 11:10:01 2003
From: vintage-audio@mailman.qth.net (Duane Fischer, W8DBF)
Date: Wed Jan  8 11:10:01 2003
Subject: [Vintage-Audio] Revox a77 help needed.
Message-ID: <200301081606.h08G6wW20001@hades.usol.com>

Rick, 	
	
It is very hard to kill off a Revox. I wonder if it is as bad off as he makes it
appear? I could be totally wrong, but in the vast majority of such situations
the 'fix' is quite minor.	
	
Duane W8DBF	


----------
From: Rick Gouge  VE7RiK <ve7rik@midbc.com>
To: vintage-audio@mailman.qth.net
Subject: Re: [Vintage-Audio] Revox a77 help needed.
Date: Tuesday, January 07, 2003 10:24 PM

Thankyou Duane, But i do not have time to work on this unit now. I sold the
revox thinking that it would work fine as it did the last time i put it
away. Now i think i will have to just sell it for parts so i can refund some
of the money back to the buyer. thanks again Duane. Rick
----- Original Message -----
From: "Duane Fischer, W8DBF" <dfischer@usol.com>
To: <vintage-audio@mailman.qth.net>
Sent: Tuesday, January 07, 2003 5:37 PM
Subject: Re: [Vintage-Audio] Revox a77 help needed.


> Rick,
>
> Take your question to the 'reel to reel' list on Yahoo Egroups. There are
a lot
> of Revox guys who hang out there. You stand a better chance of getting
help
> there. This is a very reliable unit, repairs are generally quite straight
> forward.
>
> Duane Fischer, W8DBF
>
>
> ----------
> From: Rick Gouge  VE7RiK <ve7rik@midbc.com>
> To: vintage-audio@mailman.qth.net
> Subject: Re: [Vintage-Audio] Revox a77 help needed.
> Date: Tuesday, January 07, 2003 6:24 PM
>
> Thankyou for the tip Chuck. I pulled the boards and clean them but not the
> relays. i will do that and see what happens. Should the capstand motor be
> turning all the time when the unit is turn on? Rick
> ----- Original Message -----
> From: "JM/CO" <jmerritt2@capecod.net>
> To: <vintage-audio@mailman.qth.net>
> Sent: Tuesday, January 07, 2003 12:59 PM
> Subject: Re: [Vintage-Audio] Revox a77 help needed.
>
>
> > There are several possible causes for this, but first, I would go
looking
> at
> > the things that might have been effected by storage. Relay and switch
> > contacts, especially if the thing was in a moisture prone situation, or
> > stored where heating / cooling cycles occurred.
> > Chuck N1LNH
> > ----- Original Message -----
> > From: "Rick Gouge VE7RiK" <ve7rik@midbc.com>
> > To: <vintage-audio@mailman.qth.net>
> > Sent: Tuesday, January 07, 2003 2:51 PM
> > Subject: [Vintage-Audio] Revox a77 help needed.
> >
> >
> > > My revox will fast forward and rewind but it will not play. It work
fine
> > > when i put it away a year or so ago. now it does not. The capstand
motor
> > > does not work at all. Any hints for would be helpful. Thankyou for you
> > time.
> > > Rick
> > >
> > >
> > > _______________________________________________
> > > Home: http://mailman.qth.net/mailman/listinfo/vintage-audio
> > > List Administrator: Duane Fischer, W8DBF
> > > ** For Assistance: dfischer@usol.com **
> >
> > _______________________________________________
> > Home: http://mailman.qth.net/mailman/listinfo/vintage-audio
> > List Administrator: Duane Fischer, W8DBF
> > ** For Assistance: dfischer@usol.com **
> >
>
>
> _______________________________________________
> Home: http://mailman.qth.net/mailman/listinfo/vintage-audio
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer@usol.com **
> _______________________________________________
> Home: http://mailman.qth.net/mailman/listinfo/vintage-audio
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer@usol.com **
>


_______________________________________________
Home: http://mailman.qth.net/mailman/listinfo/vintage-audio
List Administrator: Duane Fischer, W8DBF
** For Assistance: dfischer@usol.com ** 

From vintage-audio@mailman.qth.net  Wed Jan  8 11:41:06 2003
From: vintage-audio@mailman.qth.net (Roy Morgan)
Date: Wed Jan  8 11:41:06 2003
Subject: [Vintage-Audio] Revox a77 help needed.
In-Reply-To: <000e01c2b6c5$68f78660$bdacf4cc@w7u7f7>
References: <200301080147.h081lBW03602@hades.usol.com>
Message-ID: <5.0.0.25.2.20030108113912.02171030@mail01.amdiac.net>

At 07:24 PM 1/7/03 -0800, you wrote:
... Now i think i will have to just sell it for parts so i can refund some
>of the money

Rick,

Sell it for parts?  If it has ALL of it's parts, I'd be ineterested in one 
at a "parts-collection" price.

Roy


- Roy Morgan, K1LKY since 1959 - Keep 'em Glowing!
7130 Panorama Drive, Derwood MD 20855
Home: 301-330-8828 Work: Voice: 301-975-3254,  Fax: 301-948-6213
roy.morgan@nist.gov --


From vintage-audio@mailman.qth.net  Fri Jan 10 19:11:01 2003
From: vintage-audio@mailman.qth.net (Duane Fischer, W8DBF)
Date: Fri Jan 10 19:11:01 2003
Subject: [Vintage-Audio] Trade 'New' Sony PCM-R500 For Speakers
Message-ID: <200301110007.h0B07RW01887@hades.usol.com>

	
This is a top of the line DAT, digital audio tape, machine. It is in the carton,
unopened. Literally new! It is part of an insurance settlement, and I already
have two similar machines, so I do not need a third one.	
	
What I do need are some 'good' vintage floor standing three way speakers. The
Sony PCM-R500 sells for $1,600 Anyone interested? 	
	
Duane Fischer, W8DBF	
dfischer@usol.com	


From vintage-audio@mailman.qth.net  Sat Jan 11 20:36:01 2003
From: vintage-audio@mailman.qth.net (Duane Fischer, W8DBF)
Date: Sat Jan 11 20:36:01 2003
Subject: [Vintage-Audio] Re Bozac Speakers
Message-ID: <200301120133.h0C1XBW21350@hades.usol.com>

	
Greetings, 	
	
Do any of you know if the Bozac B-310 Concert Grand speakers used a permanent
magnet on the twelve inch woofers? If so, how much did each magnet weigh?
Thanks.	
	
Duane Fischer, W8DBF	


From vintage-audio@mailman.qth.net  Mon Jan 13 13:03:00 2003
From: vintage-audio@mailman.qth.net (Duane Fischer, W8DBF)
Date: Mon Jan 13 13:03:00 2003
Subject: [Vintage-Audio] Speaker Identification Assistance Needed
Message-ID: <200301131759.h0DHxIW23961@hades.usol.com>

	
I have come across a pair of what appear to be Chinese built speakers from the
sixties. Very unusual design! I have some .jpg of them. If any of you are
familiar with speakers from the fifties and sixties, I would be willing to send
you the pictures. This is not Japanese, it is Chinese.	
	
Thanks.	
	
Duane Fischer, W8DBF	


From vintage-audio@mailman.qth.net  Sun Jan 26 20:12:01 2003
From: vintage-audio@mailman.qth.net (Duane Fischer, W8DBF)
Date: Sun Jan 26 20:12:01 2003
Subject: [Vintage-Audio] FM Stereo Tuner Needed
Message-ID: <200301270109.h0R19YW29042@hades.usol.com>

	
Do any of you happen to have an older AM/FM or FM multiplex stereo tuner that
needs a nice, warm and loving home? I have a vintage Marantz integrated
amplifier that needs such a tuner. 	
	
Thanks!   	
	
Duane Fischer, W8DBF	
dfischer@usol.com	


From vintage-audio@mailman.qth.net  Wed Jan 29 15:53:03 2003
From: vintage-audio@mailman.qth.net (Roy Morgan)
Date: Wed Jan 29 15:53:03 2003
Subject: [Vintage-Audio] Fisher 500B: experience, value?
In-Reply-To: <3E1BDD1F.EFCB085E@gilroy.com>
References: <200301080147.h081lBW03602@hades.usol.com>
 <000e01c2b6c5$68f78660$bdacf4cc@w7u7f7>
Message-ID: <5.0.0.25.2.20030129154949.0384f980@mail01.amdiac.net>

Vintage Audio Folks,

A friend has located a Fisher 500B receiver, and I may get involved in 
restoration of the thing.

Does it use the 7591 tubes?
Any experience or advice about it?

Any estimates of value?

Thanks much.
- Roy Morgan, K1LKY since 1959 - Keep 'em Glowing!
7130 Panorama Drive, Derwood MD 20855
Home: 301-330-8828 Work: Voice: 301-975-3254,  Fax: 301-948-6213
roy.morgan@nist.gov --


From vintage-audio@mailman.qth.net  Wed Jan 29 16:32:01 2003
From: vintage-audio@mailman.qth.net (Rick Larson)
Date: Wed Jan 29 16:32:01 2003
Subject: [Vintage-Audio] Re: Fisher 500B: experience, value?
In-Reply-To: <5.0.0.25.2.20030129154949.0384f980@mail01.amdiac.net>
References: <200301080147.h081lBW03602@hades.usol.com> <000e01c2b6c5$68f78660$bdacf4cc@w7u7f7> <5.0.0.25.2.20030129154949.0384f980@mail01.amdiac.net>
Message-ID: <20030129212809.GL244@adc.com>

Roy,
> 
> A friend has located a Fisher 500B receiver, and I may get involved in 
> restoration of the thing.
> 
> Does it use the 7591 tubes?
> Any experience or advice about it?

I found a 500B schematic in my audio folder.  I can email the two gif images
if you want 'em.

rick
Fisher FM90

From vintage-audio@mailman.qth.net  Fri Jan 31 21:09:01 2003
From: vintage-audio@mailman.qth.net (Duane Fischer, W8DBF)
Date: Fri Jan 31 21:09:01 2003
Subject: [Vintage-Audio] Re Modern Stereo Gear
Message-ID: <200302010206.h1126OW27181@hades.usol.com>

	
Don't throw baked black beauties or handfuls of roasted resistors at me, but I
need to know if there is a list for modern stereo equipment other than the
Egroups lists I refuse to have anything to do with.	
	
Thanks. 	
	
Duane W8DBF	
dfischer@usol.com	


From vintage-audio@mailman.qth.net  Fri Jan 31 21:15:01 2003
From: vintage-audio@mailman.qth.net (Duane Fischer, W8DBF)
Date: Fri Jan 31 21:15:01 2003
Subject: [Vintage-Audio] H. Scott Manuals Needed
Message-ID: <200302010212.h112C6W27481@hades.usol.com>

	
Does anyone happen to have a manual, or a copy thereof, for the H. Scott LT-100
FM tuner and the LK-48 stereo amplifier? If so, please contact me. I am glad to
pay copying costs and mailing. Thank you.  	
	
Duane Fischer, W8DBF	
dfischer@usol.com   	
  

