Rick,
Many of them were sold that way. The case was an option. I built my own. It was
for an AT-70.
Duane W8DBF
----------
From: Rick Gouge VER7RiK <ve7rik@midbc.com>
To: vintage-audio@mailman.qth.net
Subject: Re: [Vintage-Audio] Garrard Zero 100 info needed
Date: Monday, May 06, 2002 9:20 PM
Hi Gerry, That great. thankyou very much for the info. I find it very hard
to beleave how good of shape this unit is in, The stylist is like brandnew
and the whole turntable is like mint but it has no deck to mount it on. it
looks like someone took it off or it was used in a consul type cabnet. Rick
----- Original Message -----
From: "Gerry Steffens" <gsteffens@charter.net>
To: <vintage-audio@mailman.qth.net>
Sent: Monday, May 06, 2002 6:11 PM
Subject: Re: [Vintage-Audio] Garrard Zero 100 info needed
> I looked at the Zero 100 but bought the SL-95B. As I remember, they are
> adjusted in similar fashion.
>> I'm dealing with about 30 year recall here so there may be some fuzziness
in
> the old visions.
>> Set the tracking force adjustment to zero (I think this is a dial on the
> tone arm that sticks out from the side).
>> Set the anti-skate adjustment to zero also. I think this is a small slide
> weight on an arm that raises from the support point as the tone arm tracks
> inward.
>> Once in this position set the tonearm in the middle of a record. Loosen
the
> weight on the back of the arm, slide the weight on the back of the tone
arm
> back and forth to achieve balance with the needle just barely off the
> record. Tighten the weight at this point.
>> Then set the tracking force using the dial as specified for the cartridge.
> Then set the small sliding weight antiskate to the same number as the
> tracking force.
>> The rod alongside the arm keeps the cartridge at 90 degrees to the record
> groove as it tracks inward on the record.
>> If you don't know the tracking force for the cartridge, start at about 1.0
> and play a record. If it skips, increase by 1/2 grams until the cartridge
> tracks (doesn't skip grooves). Always keep the anti-skate number equal to
> the tracking force.
>> That kind of does it I think????
>> Gerry
>>>> ----- Original Message -----
> From: "Rick Gouge VER7RiK" <ve7rik@midbc.com>
> To: <vintage-audio@mailman.qth.net>
> Sent: Monday, May 06, 2002 7:48 PM
> Subject: [Vintage-Audio] Garrard Zero 100 info needed
>>> > Since everybody is on the subject of Garrard turntables. I have this
> Garrard
> > Zero 100 sitting here and it sure looks like a pro type turn table. It
is
> > very well constructed and the weight system is one that i have never
send
> > before on a turntable. it has a slid weight on the arm that looks like
the
> > style you would see on scales in a bucther shop weighscale. the main arm
> has
> > a rail running along side of it about one half inch away. looks abit
like
> it
> > could be a brace maybe. Does anybody know anything about this jewel ?
Rick
> >
> >
> > _______________________________________________
> > Home: http://mailman.qth.net/mailman/listinfo/vintage-audio> > List Administrator: Duane Fischer, W8DBF
> > ** For Assistance: dfischer@usol.com **
>> _______________________________________________
> Home: http://mailman.qth.net/mailman/listinfo/vintage-audio> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer@usol.com **
>
_______________________________________________
Home: http://mailman.qth.net/mailman/listinfo/vintage-audio
List Administrator: Duane Fischer, W8DBF
** For Assistance: dfischer@usol.com **