[Vintage-Audio] 'Lytic caps needed for Scott amp.

Wed Jun 12 01:24:01 2002

Try Everet Hoard of Frontier Cap. Lehr, SD.
He rebuilds Electrolytics
Chuck

Philip Atchley wrote:
> 
> Hello
> Overhauling a Scott amplifier for a friend.  As some of the 'lytics have
> leaked & bulged the seals slightly we wish to replace all 'lytics for long
> term reliability (shipping back and forth via UPS gets expensive).
> 
> Need a source the following.   ALL are FP can types and a 'small' increase
> in values shouldn't hurt anything.  There are 16 components and 25 wires
> connected to these cans and  there is no room under the chassis to mount
> terminal strips and radial caps (except perhaps for a couple of the 25Volt
> units etc)..
> 
> NOTE:  AES is out of stock on all 500 Volt FP caps and have no idea when
> they might get more (due to manufacturing problems).
> 
> 1.  30uF/30uF at 500 VDC, FP style Can.  Need 2.
> 2.  20uF/450VDC, 20uF/450VDC, 25uF/25VDC, 25uF/25VDC, FP Can.  Need 1.
> 3.  100uF, 100 uF, 100uF, 100 uF at 75VDC, FP Can.    Need 1.
> 
> 73 de Phil  KO6BB
> 
> REAL Radio is heard on Boatanchor Receivers.
> REAL Music is played through  'Valve' Guitar amps!
> [email protected]
> Merced, Central California
> 
> _______________________________________________
> Home: http://mailman.qth.net/mailman/listinfo/vintage-audio
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: [email protected] **