[TVI-RFI-EMI] TVI Filters, etc. FS

[Ken Simpson, W8EK]

Drake Low Pass TVI Filters For Sale:

A low pass TVI filter is added to the transmitter to reduce
harmonic interference. All have SO-239 connectors, and are
50 ohm filters.

This first two work on 6 meters as well as HF:

Drake TV-1000-LP Low pass TVI filter
This is the filter that may also be used on the low end of six
meters, as well as HF. It is good for 1000 W "average" below
30MHz, and about 200 W up to 52 MHz. With paper work for $25.

Drake TV-1000
LP Filter as above, which functions fine electrically, but
looks ugly. With paper work. $20


Other Low Pass TVI Filters:

Bencher YA-1, high power, low pass TVI filter
If you need a heavy duty filter for the output of your amplifier,
this one is ideal. It will take full legal power plus, and has at
least 80 db signal attenuation at TV channel 2. This one works
great, and is in its original box.
Bencher currently sells these for about $90. Only $60.

Bencher YA-1
As above, but not in original box. $45

B & W FL-10/1500
This filter cuts off just above 10 meters, and handles 1500
Watts. It is the latest model B&W filter.In very nice condition,
it looks close to new. $40.

Johnson 250-20 Low Pass Filter
This is a 52 ohm cylindrical low pass filter with a cut
off frequency of 45 MHz and 75 db of attenuation.
It is rated to take 1000 Watts of AM, or 5000 Watts
PEP SSB. With mounting bracket. $30

Para Dynamics PDC 1089
This filter is rated at a full Kilowatt, up to 30 MHz.
5 x 6 x 2 inch black box, instead of the more familiar long
enclosure. It looks like new. $25


Coaxial Cable "Jumpers":
I have a good quantity of coaxial cable "jumpers" available.
These are short lengths of RG-8 coax (the larger coax, about
0.4 inches in diameter), with a PL-259 connector on both ends.
I have a variety of lengths from under a foot to about 3 feet
long. Send me the lengths that you would like, and I will see
how close I can come.
All jumpers are $6 each.


Coax connectors and adapters:

Prices are per connector. Several of each are available.
Most are unused.

UHF Right angle 90 degree elbow connector $3

UHF double female "Barrel connector" (two SO-239 together) $3

UHF "Bulkhead Connector" - Double female, as above, but for
mounting thru a window, siding, etc. about 3 inches long $6

UHF double male connector (two PL-259's together) $3

UHF "T" connector with two female (SO-239) and one male
(PL-259) connection $5

Antenna adapter to fit the BNC connector on the HT
and provide an SO-239 connector that will permit
a PL-259 to be attached. (BNC male to UHF female) $5

UHF Male to BNC female (opposite of above) $5

BNC male for coax cables
standard type $2
crimp on type $3

Chassis mount BNC female
square mount (uses 4 screws) $3
screw in type $3

BNC "T", two female and one male $3

"N" Connector, Double Male $8


I also have many other accessories available such as many
different types of microphones, HTs, VHF and UHF rigs, HF
and VHF/UHF antennas, etc.
Just too many to list here. Please e-mail your requests.

Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at FLHam.net or W8EK at arrl.net
Voice Phone (352) 732-8400