[TVI-RFI-EMI] TVI-RFI-EMI Digest, Vol 46, Issue 1

Ed Gerber w5gcx1 at gmail.com
Sun Apr 29 20:31:17 EDT 2012


I thougoht this was a technical reflector .......not someone's personnel
place to sell his stuff !!!

On Sun, Apr 29, 2012 at 11:01 AM, <tvi-rfi-emi-request at mailman.qth.net>wrote:

> Send TVI-RFI-EMI mailing list submissions to
>        tvi-rfi-emi at mailman.qth.net
>
> To subscribe or unsubscribe via the World Wide Web, visit
>        http://mailman.qth.net/mailman/listinfo/tvi-rfi-emi
> or, via email, send a message with subject or body 'help' to
>        tvi-rfi-emi-request at mailman.qth.net
>
> You can reach the person managing the list at
>        tvi-rfi-emi-owner at mailman.qth.net
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of TVI-RFI-EMI digest..."
>
>
> Today's Topics:
>
>   1. Low Pass TVI Filters FS (Ken Simpson, W8EK)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sun, 29 Apr 2012 08:36:16 -0400
> From: "Ken Simpson, W8EK" <W8EK at flham.net>
> Subject: [TVI-RFI-EMI] Low Pass TVI Filters FS
> To: TVI - RFI List <tvi-rfi-emi at mailman.qth.net>
> Message-ID: <4F9D35C0.3040802 at flham.net>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
>
> Drake Low Pass TVI Filters For Sale:
>
> A low pass TVI filter is added to the transmitter to reduce
> harmonic interference. All have SO-239 connectors, and are
> 50 ohm filters.
>
> This first two work on 6 meters as well as HF:
>
> Drake TV-1000-LP Low pass TVI filter
> This is the filter that may also be used on the low end of six
> meters, as well as HF. It is good for 1000 W "average" below
> 30MHz, and about 200 W up to 52 MHz. With paper work for $25.
>
> Drake TV-1000
> LP Filter as above, which functions fine electrically, but
> looks ugly. With paper work. $20
>
> Drake TV-3300-LP Low Pass Filter
> This modern low pass filter has been optimized to have more
> attenuation in the 40 MHz region, where many TVs have their
> IF. It is good for 1000 Watts "average" according to the manual,
> and has over 80 db attenuation at 41 MHz. This one looks great,
> and includes the paper work. $30
>
>
> Other Low Pass TVI Filters:
>
>
> The Bud LF-601 works fine on six meters.
>
> Bud LF-601 low pass filter
> This filter is adjustable for best attenuation in your particular
> situation, and also to more closely match your specific impedance.
> It cuts off at about 52 MHz (if adjusted as such) so it can be
> used on 6 meters, and will handle 1500 watts. $35
>
> Bencher YA-1, high power, low pass TVI filter
> If you need a heavy duty filter for the output of your amplifier,
> this one is ideal. It will take full legal power plus, and has at
> least 80 db signal attenuation at TV channel 2. This one works
> great, and is in its original box.
> Bencher currently sells these for about $90. Only $60.
>
> Bencher YA-1
> As above, but not in original box. $45
>
> B & W FL-10/1500
> This filter cuts off just above 10 meters, and handles 1500
> Watts. It is the latest model B&W filter.In very nice condition,
> it looks close to new. $40.
>
> Johnson 250-20 Low Pass Filter
> This is a 52 ohm cylindrical low pass filter with a cut
> off frequency of 45 MHz and 75 db of attenuation.
> It is rated to take 1000 Watts of AM, or 5000 Watts
> PEP SSB. With mounting bracket. $30
>
> Para Dynamics PDC 1089
> This filter is rated at a full Kilowatt, up to 30 MHz.
> 5 x 6 x 2 inch black box, instead of the more familiar long
> enclosure. It looks like new. $25
>
>
> Dentron "Big Dummy" RF Dummy Load:
>
> This is Dentron's equivalent to the the traditional Heath
> "Cantenna" dummy load that will handle a kilowatt. It has
> a derating curve with it.
>
> It is in good shape both electrically and cosmetically.
> It has no rust, dents nor dings.
>
> I measured the resistor and it is 53 ohms, so obviously it
> is in good shape. I have never seen any others this close
> to 52 ohms!
>
> I can ship it either with or without oil. The cost to
> purchase is the same, but of course the shipping will be
> higher with the oil.
>
> With derating curve and paper work for $45.
>
>
> I also have many other accessories available such as many
> different types of microphones, HTs, VHF and UHF rigs, HF
> and VHF/UHF antennas, etc.
> Just too many to list here. Please e-mail your requests.
>
> Prices do not include shipping from Florida.
>
> Thanks.
>
> 73,
>
> Ken, W8EK
>
> Ken Simpson
> E-mail to W8EK at FLHam.net or W8EK at arrl.net
> Voice Phone (352) 732-8400
>
>
>
>
>
>
>
>
>
>
> ------------------------------
>
> _______________________________________________
> TVI-RFI-EMI mailing list
> TVI-RFI-EMI at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/tvi-rfi-emi
>
>
> End of TVI-RFI-EMI Digest, Vol 46, Issue 1
> ******************************************
>


More information about the TVI-RFI-EMI mailing list