[TVI-RFI-EMI] Low Pass TVI Filters FS

[Ken Simpson, W8EK]

Low Pass TVI Filters For Sale:

A low pass TVI filter is added to the transmitter (inserted
in the coax line after the transmitter or transceiver) to
reduce harmonic interference.  All of these have an SO-239
connector on each end, and are designed for 50 ohm systems.

Bencher YA-1, high power, low pass TVI filter
If you need a more heavy duty filter for the output of
your amplifier, this one is ideal. It will take full legal
power plus, and has at least 80 db signal attenuation at
TV channel 2. It is in a very sturdy metal case.
This one works great, and looks close to new. Someone added
some felt to the bottom, so that it protects better.
It is in its original box, with paper work.
Bencher currently sells these for about $90.
This one is only $65.

B & W FL-10/1500 (Also known as model 425) low pass filter
This filter cuts off just above 10 meters, and will handle
1500 Watts.  This is the latest model B & W filter. It is
in very nice condition; it looks very close to new.
With paper work $40.

Drake TV-5200-LP Low Pass Filter
This is the more modern version of the Drake TV-1000 Low Pass
Filter. This is the filter that may also be used on the low
end of six meters, as well as HF. It is good for 1000 Watts
average below 30 MHz, and about 200 W up to 52 MHz. It works
fine, and is in very nice shape. $35

Drake TV-3300-LP Low Pass Filter
This modern low pass filter has been optimized to have more 
attenuation in the 40 MHz region, where many TVs have their IF.
It is good for 1000 Watts "average" according to the manual,
and has over 80 db attenuation at 41 MHz. This one looks fine,
and includes the paper work. $30

Drake TV-42-LP Low pass filter
Rated for 100 W thru 30 MHz.
Similar characteristics as the TV-3300, but lower power rating.
It works fine and looks like new. $15

Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at FLHam.net or W8EK at arrl.net
Voice Phone  (352) 732-8400