Ed, I was having the exact same problem today with my radio, not a FT-817, but an Elecraft K4.
John, NP2B, gave me the same suggestion as Rusty gave to you and suggested that I check that slider and indeed that was the problem. Some how it had slipped down just a bit and it was shutting me down! I hope that was the solution for you.
I am a fledging FT8 op and am back in business.
We are blessed to have experienced gentlemen such as John, Rusty and others in the club to help us along!!
73,
John
W4GD
I believe the default power setting in WSJT-X is set to zero. Check the slider and make sure it is all the way up.
Rusty - W3US
I have a seemingly simple problem that is driving me nuts. I’m hoping this experienced group will come up with some hot ideas. Easy: Adapting an FT-817 to FT8. I’m using a Digirig interface with the latest WSJT-X 2.5.4. The rig-control interface works properly. The receive part of the audio interface works. But the darn thing will not transmit. The FT817 thinks it is transmitting in either TUNE or OPERATE. Transmit light comes on, DC amps increase slightly (to .64A from .42A on receive). But the wattmeter shows no RF output at all. Lack of output confirmed by spectrum analyzer. Radio works properly on CW and SSB. The Digirig is producing audio, verified by hooking a headphone across it. I have played with menu items, including #46: SSB mic level and #3: 9600 mic. Neither has any effect at any setting. I must be missing some setup function, but it has eluded me. Any ideas would be greatly appreciated.
______________________________________________________________
TVARC mailing list
Home: http://mailman.qth.net/mailman/listinfo/tvarc
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html