Sounds as if you do understand.  Maybe I the controls set wrong.  Here’s what mine looks like:

From: Steven Roth [mailto:[email protected]]
Sent: Friday, March 25, 2022 9:07 AM
To: K2PS Pete Stafford
Cc: TVARC
Subject: Re: [TVARC] FT8 Issue

If I understand your issue, I can get my "WSJT-X Wide-Graph" band display down to 100 using the controls for the graph.  I saw a Russian station down there working a US station. I now see a station centered at 150.  Perhaps I don't understand your issue.

Steve - AD4K

On Fri, Mar 25, 2022 at 8:54 AM K2PS Pete Stafford <[email protected]> wrote:

While trying to call a station on 20m FT8 this morning, I noticed that I wasn’t seeing the station’s Rx Frequency info on the right side of the screen, where it normally appears.  So I inspected a bit further and noticed that while the station was transmitting at an unusual 100 offset, my Rx arrow in the waterfall was set at 200.  I was unable to type in his frequency manually.  The lowest it will go is 200.  Yet I see his activity on the left side Band Activity list.

Anyone have a solution for this?  I know I could set my frequency to something lower than 14.074, but maybe there’s a simpler solution?

73, Pete, K2PS

______________________________________________________________
TVARC mailing list
Home: http://mailman.qth.net/mailman/listinfo/tvarc
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html