[TVARC] Having issues with radio.

joe signorelli ab3cr at hotmail.com
Sat Aug 30 13:03:28 EDT 2025


Kym,  I have a number of fans salvaged from old computers. I just had a pacemaker installed, so I would be unable to come to you but you are welcome to stop by and see if one will be a right fit.  I live in Summerhill.  Joe AB3CR 301-580-3526



Sent from my Galaxy



-------- Original message --------
From: Kym via TVARC <tvarc at mailman.qth.net>
Date: 8/30/25 11:36 AM (GMT-05:00)
To: Kym <kintbus at protonmail.com>
Cc: TVARC <tvarc at mailman.qth.net>
Subject: Re: [TVARC] Having issues with radio.


Much to my dismay this was not end of trouble.

Last night I tested fan about questioned if it was operating.

To my dismay, it operates last night in house and saw it working.

But after being outside, it said "nope.  Not gonna happen. " Thus, transmission started failing.

Didn't realize it because the fan for power supply was on.  I literally had to look at back of machine to verify.

I am currently waiting for fan from Amazon tomorrow and will install.   Unfortunately, the required fan is 80 mm and best buy only carries 120mm for today's computers. .

No fun for me today.  Was looking forward to the contest later today on digital.

Kym Lenkus - KQ4ZOA
Email: kintbus at protonmail.com
cell : 208-261-1070


-------- Original Message --------
On 8/30/25 9:53 AM, Kym <kintbus at protonmail.com> wrote:

>
>  Thank you everyone for your help.
>
>  It was definitely a helpful education that will assist me when I run into problems again.
>
>  I am embarrassed to say what exactly was the problem.
>
>  As I am running new sdr software, it allows me  access to the rig via the software.   So it's very easy to change settings easily.  Things I normally would not touch because I don't have to cancel be mistakenly adjusted.
>
>  That's exactly what happened.  One of the VFO settings got hit.   I thought I was operating on one, but really was on another.
>
>  Lession learned!
>
>  I got resolved.  Pskreporter is seeing both send and received signals.  Made contacts!
>
>  The universe is treating me kindly again.  Lol
>
>  Kym Lenkus - KQ4ZOA
>  Email: kintbus at protonmail.com
>  cell : 208-261-1070
>
>
>  -------- Original Message --------
>  On 8/29/25 7:35 PM, Kym via TVARC <tvarc at mailman.qth.net> wrote:
>
>  >  Hi
>  >
>  >  I have a icom 7300.
>  >
>  >  It has begun to behave a little strange.
>  >
>  >  I seem to lose the ability to transmit.
>  >
>  >  Then I noticed that the RF power would go down to zero!    Nope.  Did not adjust.    I reset and it drops again.
>  >
>  >  Antenna swr is good and has acceptable value.
>  >
>  >  Anyone have an idea?
>  >
>  >  Kym Lenkus - KQ4ZOA
>  >  Email: kintbus at protonmail.com
>  >  cell : 208-261-1070
>  >  ______________________________________________________________
>  >  TVARC mailing list
>  >  Home: http://mailman.qth.net/mailman/listinfo/tvarc
>  >  Help: http://mailman.qth.net/mmfaq.htm
>  >  Post: mailto:TVARC at mailman.qth.net
>  >
>  >  This list hosted by: http://www.qsl.net
>  >  Please help support this email list: http://www.qsl.net/donate.html
>  >
______________________________________________________________
TVARC mailing list
Home: http://mailman.qth.net/mailman/listinfo/tvarc
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:TVARC at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/tvarc/attachments/20250830/09463ec3/attachment.html>


More information about the TVARC mailing list