[TVARC] Fwd: Tubing cutter

[Larry Sheridan]

Good evening all -

and thanks for the quick & great responses to my "cutter needed" email from
Dave W4WNG, John NP2B, Hal W4OE, Joe AB3CR & Robert WA3EWK, you folks &
TVARC are the best!  Ended up running over to see Hal this afternoon for
the cutter and also some other things that came up in the meantime & all is
taken care of.

Thanx again & Best 73,

Larry K4LES







---------- Forwarded message ---------
From: Larry Sheridan <larry10782 at gmail.com>
Date: Wed, Jun 1, 2022 at 9:27 PM
Subject: Tubing cutter
To: TVARC Reflector <TVARC at mailman.qth.net>



Greetings all -

Looking for someone that has a aluminum/copper tubing cutter, commonly used
in copper pipe plumbing sweat solder projects.  I've got a small yagi
repair project that needs 1 cut to be done on a short piece of 3/8"
aluminum tubing for a replacement director element on a UHF beam.

Since I'm not likely to need one again (famous last words, I know), I'd
prefer to not purchase a new cutter, just thinking that fellow ham might
have one available that I could swing by your house when convenient & do
the 30-second cut while we visit.  Or, you would be welcome to stop by here
with it & see this shack if you'd prefer.

Thanks all & 73,

Larry Sheridan K4LES
1832 Palo Alto Ave, west off Morse
 a little south of Spanish Springs
307-630-5697
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/tvarc/attachments/20220602/9a0a2437/attachment-0001.html>