[TVARC] IC-7300 Help
Steven Buhrow
steven.buhrow at pm.me
Thu Dec 2 16:20:58 EST 2021
Hal,
I’m using my Icom-7300 mostly for data on FT-8 and should be able to help even though I’m using a Mac.
Is it the FT-8 data mode you are trying to configure?
There are really four things to look at:
1) ICOM-7300 settings
2) Sound card
3) USB cable between the rig and computers and the correct drivers installed
4) Software settings
It sounds like an audio setting issue to me.
Steve, WJ9G
> On Dec 2, 2021, at 4:07 PM, <tvarc-request at mailman.qth.net> <tvarc-request at mailman.qth.net> wrote:
>
> Send TVARC mailing list submissions to
> tvarc at mailman.qth.net
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://mailman.qth.net/mailman/listinfo/tvarc
> or, via email, send a message with subject or body 'help' to
> tvarc-request at mailman.qth.net
>
> You can reach the person managing the list at
> tvarc-owner at mailman.qth.net
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of TVARC digest..."
>
>
> Today's Topics:
>
> 1. Re: K3WT CQWW-CW SOHP SB (40) Assisted (k2te at juno.com)
> 2. SV2RSG (Mt Athos) on 7.056 F/H (k2te at juno.com)
> 3. IC-7300 Help (WA1UTQ)
> 4. Re: IC-7300 Help (w3us at casa-aloha.net)
> 5. Re: IC-7300 Help (stevelotta at aol.com)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 30 Nov 2021 22:12:34 +0000
> From: <k2te at juno.com>
> To: tommenas.k3wt at gmail.com
> Cc: tvarc at mailman.qth.net
> Subject: Re: [TVARC] K3WT CQWW-CW SOHP SB (40) Assisted
> Message-ID: <AABS4PJSFAWMRHLS at smtpout03.vgs.untd.com>
> Content-Type: text/plain; charset=us-ascii
>
> Tom,
>
> Coming from NH, I can relate to WX conditions during the major contests.
> (The worse was a heavy wet snowstorm in the middle of CQ WW SSB one
> year.) I run a 6BTV vertical inside a PVC flagpole plus a 15m vertical
> dipole held up by a fiberglass mast at the back of the house. The
> neighbors don't mind and the postal drop is behind a tall hedge so no
> vigilantes can squawk, hi.
>
> I've thought about an inverted V for 80 with the apex hoisted up on my
> flagpole. I would have to add coils since getting the distance would be
> a problem. The 80m portion of my multiband vertical is a 3-foot stinger
> mated to a big coil at the top of the antenna. The stinger sticks out of
> the PVC cap but it's hard to see so I'm safe (so far). Anyway, it would
> be interesting to see if it would work better than what I have now.
>
> You're not far from me. I'm in Woodbury, about a mile from route 42.
>
> 73 de Ed
>
>
> ____________________________________________________________
> Choose to be safer online.
> Opt-in to Cyber Safety with NortonLifeLock.
> Plans starting as low as $6.95 per month.*
> https://store.netzero.net/account/showService.do?serviceId=nz-nLifeLock&utm_source=mktg&utm_medium=taglines&utm_campaign=nzlifelk_launch&utm_content=tag695&promoCode=A34454
>
>
> ------------------------------
>
> Message: 2
> Date: Wed, 1 Dec 2021 01:14:36 +0000
> From: <k2te at juno.com>
> To: TVARC at mailman.qth.net
> Subject: [TVARC] SV2RSG (Mt Athos) on 7.056 F/H
> Message-ID: <AABS4PVSHAM967GA at smtpout04.vgs.untd.com>
> Content-Type: text/plain; charset=us-ascii
>
> Just worked him for a new one - another FLATNO!! Nice and strong here.
> His QRZ page says he is not using the "/A" on the end of his call because
> he is a permanent resident of the monestery. Looking up his call with or
> without the "/A" returns the same QTH on Mt Athos.
>
> Good luck to everyone else chasing him. He is proficient with the F/H
> protocol so he is knocking them out fast.
>
> 73 de Ed
>
> ____________________________________________________________
> Sponsored by https://www.newser.com/?utm_source=part&utm_medium=uol&utm_campaign=rss_taglines_more
>
> CNN Suspends Chris Cuomo Indefinitely
> http://thirdpartyoffers.juno.com/TGL3141/61a6ce079d3724e0745edst04vuc1
> 3 Dead, 6 Injured in Michigan School Shooting
> http://thirdpartyoffers.juno.com/TGL3141/61a6ce07bc1244e0745edst04vuc2
> Clarence Thomas' Long Fight Reaches Its 'Zenith'
> http://thirdpartyoffers.juno.com/TGL3141/61a6ce07db6f04e0745edst04vuc3
>
>
> ------------------------------
>
> Message: 3
> Date: Thu, 2 Dec 2021 15:08:17 -0500
> From: "WA1UTQ" <wa1utq at embarqmail.com>
> To: "TVARC" <tvarc at mailman.qth.net>
> Subject: [TVARC] IC-7300 Help
> Message-ID:
> <!&!AAAAAAAAAAAYAAAAAAAAALSIvVfu695CuqF9mw8G+kDCgAAAEAAAAIMGjy1LAVtPnXJgb6NhX/[email protected]>
>
> Content-Type: text/plain; charset="us-ascii"
>
> What's Up?
>
>
>
> IC-7300 Owners/Users whom would you consider an "Expert" in configuring
>
> The Data Modes on the 7300 that are members of TVARC??
>
> I'm having a problem, don't know where to look to resolve same.
>
> It's the TX of Data Modes? My software key's the rig (7300) the rig goes
>
> In to TX mode. But the data being transmitted is..WAY-WAY down in signal
> strength
>
> Can't hear it through the Monitor mode on 7300.In short I'm not TXing
> Data????
>
>
>
> I can go manual.CW etc. No problem.TX FB 'NO PROBLEM"
>
>
>
> If you know of someone in TVARC that could help me "Please recommend them to
> me".
>
>
>
> So,sad.nice rig unuseable in DATA MODES????
>
>
>
> Best 73,
> Hal, W4OE
>
>
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://mailman.qth.net/pipermail/tvarc/attachments/20211202/cdfa6334/attachment-0001.html>
>
> ------------------------------
>
> Message: 4
> Date: Thu, 2 Dec 2021 16:04:19 -0500
> From: "w3us at casa-aloha.net" <w3us at casa-aloha.net>
> To: WA1UTQ <wa1utq at embarqmail.com>
> Cc: TVARC <tvarc at mailman.qth.net>
> Subject: Re: [TVARC] IC-7300 Help
> Message-ID: <DA045BF0-D784-4742-BD4B-8C3DDF80603E at casa-aloha.net>
> Content-Type: text/plain; charset="utf-8"
>
> Not an ICOM nor a data expert, but I did notice in WSJT-X as well as JTDX the power slider is turned way down initially. You need to crank it up all the way.
>
> Rusty - W3US
>
>> On Dec 2, 2021, at 15:08, WA1UTQ via TVARC <tvarc at mailman.qth.net> wrote:
>>
>> ?
>> What?s Up?
>>
>> IC-7300 Owners/Users whom would you consider an ?Expert? in configuring
>> The Data Modes on the 7300 that are members of TVARC??
>> I?m having a problem, don?t know where to look to resolve same.
>> It?s the TX of Data Modes? My software key?s the rig (7300) the rig goes
>> In to TX mode. But the data being transmitted is..WAY-WAY down in signal strength
>> Can?t hear it through the Monitor mode on 7300?In short I?m not TXing Data????
>>
>> I can go manual?CW etc. No problem?TX FB ?NO PROBLEM?
>>
>> If you know of someone in TVARC that could help me ?Please recommend them to me?.
>>
>> So,sad?nice rig unuseable in DATA MODES????
>>
>> Best 73,
>> Hal, W4OE
>>
>> ______________________________________________________________
>> TVARC mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/tvarc
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:TVARC at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://mailman.qth.net/pipermail/tvarc/attachments/20211202/cce443a9/attachment-0001.html>
>
> ------------------------------
>
> Message: 5
> Date: Thu, 2 Dec 2021 21:07:17 +0000 (UTC)
> From: <stevelotta at aol.com>
> To: tvarc at mailman.qth.net
> Subject: Re: [TVARC] IC-7300 Help
> Message-ID: <1190806487.2105293.1638479237677 at mail.yahoo.com>
> Content-Type: text/plain; charset="utf-8"
>
> I use mine for FT8 and FT4 all the time with WSJT-X...do you move the slid bar on the right side of the program up till you see a Blue bar in the ALC? That's how you turn up the power?In a message dated 12/2/2021 3:08:38 PM Eastern Standard Time, tvarc at mailman.qth.net writes:?
>
> What?s Up???
>
> ?
>
> IC-7300 Owners/Users whom would you consider an ?Expert? in configuring
>
> The Data Modes on the 7300 that are members of? TVARC??
>
> I?m having a problem, don?t know where to look to resolve same.
>
> It?s the TX of Data Modes???? My software key?s the rig (7300) the rig goes
>
> In to TX mode.? But the data being transmitted is..WAY-WAY down in signal strength
>
> Can?t hear it through the Monitor mode on 7300?In short I?m not TXing Data????
>
> ?
>
> I? can go manual?CW etc.? No problem?TX FB ?NO PROBLEM???
>
> ?
>
> If you know of someone in TVARC that could help me ?Please recommend them to me?.
>
> ?
>
> So,sad?nice rig unuseable in DATA MODES????
>
> ?
>
> Best 73,
> Hal, W4OE
>
> ?
> ______________________________________________________________
> TVARC mailing list
> Home: http://mailman.qth.net/mailman/listinfo/tvarc
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:TVARC at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://mailman.qth.net/pipermail/tvarc/attachments/20211202/6b79b91c/attachment.html>
>
> ------------------------------
>
> _______________________________________________
> TVARC mailing list
> TVARC at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/tvarc
>
>
> End of TVARC Digest, Vol 58, Issue 1
> ************************************
More information about the TVARC
mailing list