[TVARC] Zero Points in N1MM+

[K2PS Pete Stafford]

Frank - Maybe this person can help you (see attached).

-----Original Message-----
From: Frank M [mailto:phrankxm at gmail.com] 
Sent: Sunday, May 26, 2019 9:15 AM
To: K2PS Pete Stafford
Subject: Re: [TVARC] Zero Points in N1MM+

That is one option. The other is to extort adi file to another logger,
change RTTY to CW then reimport to N1MM to see my score!!!!!
Frank KA1AF 

Sent from my iPhone

> On May 26, 2019, at 9:07 AM, K2PS Pete Stafford <psk2ps at gmail.com> wrote:
> 
> Well, worse comes to worse, after the contest you can replace RTTY (or
DIG)
> with CW in the Cabrillo file.
> 
> 73, Pete, K2PS
> 
> -----Original Message-----
> From: tvarc-bounces at mailman.qth.net [mailto:tvarc-bounces at mailman.qth.net]
> On Behalf Of Frank M
> Sent: Sunday, May 26, 2019 8:34 AM
> To: villages reflector
> Subject: [TVARC] Zero Points in N1MM+
> 
> Problem seems to have been found but still no solution.
> Operating N1MM+ with FLDIGI in CW mode as digital interface. Using N1MM+
> macros. Rig (IC-7300) is in USB Digital. Correct contest loaded and
verified
> in N1MM+. Macros generate good CW through rig - no problems making CW
> contacts. Each QSO correctly enters valid data into the N1MM+ log but
points
> are zero. 
> Problem: N1MM+ shows contact mode as RTTY!! No matter what I do in N1MM+
> setup, mode control etc, i can not get N1MM+ to show contact mode as
CW!!!!
> Note: it would probably work right if I had the time to set up to operate
> the rig in real CW but have not done it yet. I have used the digital set
up
> before but this time it just is not working right. 
> Think I will order a RIGblaster!!!!
> 
> Frank KA1AF 
> 
> Sent from my iPhone
> ______________________________________________________________
> TVARC mailing list
> Home: http://mailman.qth.net/mailman/listinfo/tvarc
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:TVARC at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: MrsADI.jpg
Type: image/jpeg
Size: 83040 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/tvarc/attachments/20190527/8f43fdea/attachment-0001.jpg>