[TVARC] Ground Rod
Doug Moe
moeda at yahoo.com
Tue Jul 2 10:28:01 EDT 2019
Here in nh we took 1/2 inch copper rod and cut an angle at one end to make it sharp. Fastened a modified garden hose with 2 hose clamps to the other end. Turned on the water and pushed the rod 5 feet into the ground by publishing down and pulling back maybe 8 times. Then hit ledge. But in regular dirt 9 ft would be easy. Never used a sledge.
Doug KC1JZC
Doug
Mobile 603 493 0749
> On Jul 2, 2019, at 9:51 AM, Ed Krome <e.krome at comcast.net> wrote:
>
> You might try renting a fence post driver. This is a 2’ steel pipe with handles and a heavy load in one end. Try Home Depot.
> BTW standing on a ladder pounding a ground rod in with a sledge hammer is probably not the best idea🤪
>
> Ed Krome K9EK
>
> Sent from my iPhone
>
>> On Jul 1, 2019, at 10:22 PM, K2PS Pete Stafford <psk2ps at gmail.com> wrote:
>>
>> I’m finally getting around to installing a ground rod. I know, I know, should have done it long ago. But now that my touch faucet starts running when I run HP, I’m gonna have to do something about it.
>>
>> Does anyone have any suggestions as to how I get that thing eight feet into the ground? I tried a power washer but it will only go so far. Only using a hammer to pound it in doesn’t cut it. I suppose a big sledgehammer might do the trick? But I’m thinking maybe someone has come up some brilliant idea for getting that rod in the ground easily, before I go out and buy one and then start pounding away.
>>
>> 73, Pete, K2PS.
>> ______________________________________________________________
>> TVARC mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/tvarc
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:TVARC at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
> ______________________________________________________________
> TVARC mailing list
> Home: http://mailman.qth.net/mailman/listinfo/tvarc
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:TVARC at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/tvarc/attachments/20190702/d722e7b1/attachment.html>
More information about the TVARC
mailing list