[TVARC] Fwd: TVARC’s “Apple Anomaly”: Status “WORKING” on EchoLink!!!

[mike regan]

 Many thanks to Ed W8APE for getting the Echolink working on the TVARC repeater again.Please see if you can increase the maximum number from 5 to 10.Thanks again.KM4ZTE Mike
    On Monday, June 18, 2018, 2:56:16 PM EDT, Anthony Hackenberg <anthony.w.hackenberg at gmail.com> wrote:  
 
 Thanks to Ed Williams (W8APE; our club’s EchoLink custodian) for all his work in debugging & successfully fixing the “Apple Anomaly!”  Way to go, Ed!

On Mon, Jun 18, 2018 at 12:54 George Briggs <k2dm at att.net> wrote:

Tom, NV1U, asked me to forward this to the reflector.Great news from Ed, W8APE. EchoLink is now working again. Read below to see how Ed got it done for us. Nice going, Ed, and thank you!73,George, K2DM

Sent from my iPhone
Begin forwarded message:


From: Tom Grosvenor <tgrosvenor3 at comcast.net>
Date: June 18, 2018 at 11:11:25 AM EDT
To: Tony Hackenberg <anthony.w.hackenberg at gmail.com>, klefhjlpt at gmail.com, k2dm at att.net, rich.erlichman at gmail.com, "Earle D. Hancock" <earleiphone at gmail.com>
Subject: TVARC’s “Apple Anomaly”: Status “WORKING” on EchoLink!!!






Tom G... NV1U – SKCC #18720

TVARC VP & Programs Coordinator.

Begin forwarded message:

From: "Ed Williams" <eawilliams at prodigy.net>
Date: June 18, 2018 at 8:59:21 AM EDT
To: "Anthony Hackenberg" <anthony.w.hackenberg at gmail.com>
Cc: <tgrosvenor3 at comcast.net>, <john at w3gqj.net>, <john.np2b at gmail.com>
Subject: Re: TVARC’s “Apple Anomaly”: Status on Echolink?

Hi, Tony -- I noted that you had signed in a couple of times but did not start a conversation so I was unsure it was actually working.  Others with Apple phones should now give it a try. I did some research again specifically for the new CenturyLink Technicolor modem (even those have different versions).  It took a while to figure out how to add a new "application" specifically for the Echolink PC.  It's called "Dell" in the listing on the modem.  Then changed the TCP to 5200 and the UDP to 5198 and 5199.  Then ran some virus and malware scans and rebooted the PC. I also reset the "conferences" on the SysOp from 10 to 5 (should be enough - had problems once before with larger number). Sorry this has taken so long but I had few times to work on it and first couple of tries caused other problems so I needed to proceed with caution. 73, Ed Williams, W8APE
_______________________________
From: Anthony Hackenberg Sent: Monday, June 18, 2018 12:23 AMTo: eawilliams at prodigy.net Cc: tgrosvenor3 at comcast.net ; john at w3gqj.net ; john.np2b at gmail.com Subject: TVARC’s “Apple Anomaly”: Status?
Hi Ed/W8APE,
Looks like the “Apple Anomaly” that’s plagued the TVARC EchoLink repeater is gone!  During several tests tonight (Sunday, June 16, 2017), I was suddenly able to successfully connect to our club’s repeater using my Apple iPhone.  YIPPEE!
See the attached 2 screenshots taken from my iPhone during one of those successful connection tests as proof that I’m not hallucinating!
Did you make a specific change (or changes) that explain why it’s suddenly working again?  If so, let us know what did the trick.
73,Tony/K4QR



|  | Virus-free. www.avg.com  |


______________________________________________________________
TVARC mailing list
Home: http://mailman.qth.net/mailman/listinfo/tvarc
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:TVARC at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
-- 
Anthony W. Hackenberg
Email: anthony.w.hackenberg at gmail.com______________________________________________________________
TVARC mailing list
Home: http://mailman.qth.net/mailman/listinfo/tvarc
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:TVARC at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/tvarc/attachments/20180619/3e6166ff/attachment-0001.html>