[TrunkCom] How does one program the following FLEETMAP into a PRO92B

[Todd Hartzel]

Greetings,

> On 2 Jan 2003 at 19:33, scannerman6@juno.com wrote:
> 
> How does one program the following FLEETMAP into a PRO92B
> How does one program the following FLEETMAP into a PRO92B
> 
> S4 -  Block 0
> S0 -  Block 1
> S12 - Block 2
> S12 - Block 3
> S13 - Block 4
> S13 - Block 5
> S13 - Block 6
> S14 - Block 7
> 
> Also should I be hearing the EDACS beeps at the end of a transmission
> on a 900 Megacycle EDACS TRS?
> 
> S4 -  Block 0
> S0 -  Block 1
> S12 - Block 2
> S12 - Block 3
> S13 - Block 4
> S13 - Block 5
> S13 - Block 6
> S14 - Block 7
> 
> Also should I be hearing the EDACS beeps at the end of a transmission
> on a 900 Megacycle EDACS TRS?

Won't be possible...
The reason, Size Code S-14 uses 4096 IDs, or all 8 blocks.
S-14 can 'ONLY' be loctaed in Block #0.  If so, that will make 
it impossible to key any any other Size Code. All eight
blocks are eaten up by this one size code.

Size Code S-13 can only be key-ed into Blocks #0 & Block #4
S-13 eats up four blocks.
.
Size Code S-12 can only be key-ed into the following Blocks:
Blocks #0, #2, #4 & #6.  Size Code S-12 eats up two blocks.

Foir the 900Mhz Edacs beeps, well I too have noticed soime
strange things with those in my Travels across Illinois monitoring
the Ameren/UE Power Plants.  But hey, the scanner does work
with it.  But, if my memory serves me correctly, those beeps
were audible on my 780xlt too.  I dismissed it as normal.  It 
has been sometime since I last monitored the Central &
Southern Illinois Ameren/UE 900Mhz Power Plant Trunk Radio
Systems.  .  

73 from todd hartzel / n0vkg
http://www.n0vkg.web1000.com