[Trunkcom] Radio Shack PRO-93 Programming (!)

[Brian J Cathcart]

On Thu, 27 Dec 2001 21:00:05 -0700 Khalil Ladjevardi <khalil@faradic.net>
writes:
> Additionally, I programmed the scanner for the base frequency of 
> 482.0625 (default is 406.0000 MHZ.) but left the offset settings at 380

> (default). (Offset can only go from 380 to 579) and the steps at 25.0
KHz.
> (default)(steps are either 12.5 KHz., 25.0 KHz or 50.0 KHz.).

You have the wrong step size.  Change it to 50.0-KHz and give that a try.

System information can be found at
http://www.trunkedradio.net/cgi-bin/display.pl?sid=727


> I have been on the phone with radio Shack Support but, unfortunately,
they
> were unable to help..

I'm SHOCKED they were not able to help you [NOT!!  : )  ].  Trunkcom is
your best bet for help.

--

The Scanner Dude
Brian J. Cathcart - KE4PMJ
South Florida Trunking Guide - 5th Edition (On CD-ROM too!)
Palm Beach County Frequency Directory - 4th Edition (On CD-ROM too!)