[TMRA] TMRA Digest, Vol 77, Issue 1
[email protected]
tomandbren1 at att.net
Thu Apr 2 22:48:16 EDT 2015
This is a little late isn't it?
Sent from my Verizon 4G LTE Smartphone
----- Reply message -----
From: tmra-request at mailman.qth.net
To: <tmra at mailman.qth.net>
Subject: TMRA Digest, Vol 77, Issue 1
Date: Thu, Apr 2, 2015 5:37 AM
Send TMRA mailing list submissions to
tmra at mailman.qth.net
To subscribe or unsubscribe via the World Wide Web, visit
http://mailman.qth.net/mailman/listinfo/tmra
or, via email, send a message with subject or body 'help' to
tmra-request at mailman.qth.net
You can reach the person managing the list at
tmra-owner at mailman.qth.net
When replying, please edit your Subject line so it is more specific
than "Re: Contents of TMRA digest..."
Today's Topics:
1. Hamfest Volunteers (Michael Lacumsky)
2. Hamfest Volunteers (Michael Lacumsky)
3. Re: Hamfest Volunteers (jswanson3525 via TMRA)
4. Re: Hamfest Volunteers (jswanson3525 via TMRA)
5. Hamfest Volunteers (Michael Lacumsky)
6. Fwd: [YaesuSystemFusion] Digest Number 543 (Steve Bellner)
----------------------------------------------------------------------
Message: 1
Date: Thu, 19 Feb 2015 11:08:25 -0500
From: Michael Lacumsky <" mlacumsky"@amplex.net>
To: tmra at mailman.qth.net
Subject: [TMRA] Hamfest Volunteers
Message-ID: <54E60A79.6000008 at amplex.net>
Content-Type: text/plain; charset=utf-8; format=flowed
Greetings All:
Hamfest is fast approaching and I am looking for volunteers to man the
doors checking tickets and acting as ushers helping vendors find their
spots. This is a really fun spot to volunteer for because not only do
you get a chance to welcome the vendors, but you also get a chance to
greet people coming in to the main area.
What I need is some willing and able bodies to help check tickets at the
main door, watch the other exits and assist with the traffic flow. There
is an incentive for volunteering, but you can only volunteer if you are
a TMRA member. If you are interested in volunteering, please get in
contact with me. My email is w8mal at arrl.net.
Mike W8MAL
TMRA Hamfest Committee
------------------------------
Message: 2
Date: Wed, 25 Feb 2015 18:00:54 -0500
From: Michael Lacumsky <" mlacumsky"@amplex.net>
To: tmra at mailman.qth.net
Subject: [TMRA] Hamfest Volunteers
Message-ID: <54EE5426.8070908 at amplex.net>
Content-Type: text/plain; charset=utf-8; format=flowed
Greetings All:
Hamfest is fast approaching and I am looking for volunteers to man the
doors checking tickets and acting as ushers helping vendors find their
spots. This is a really fun spot to volunteer for because not only do
you get a chance to welcome the vendors, but you also get a chance to
greet people coming in to the main area. What I need is some willing and
able bodies to help check tickets at the main door, watch the other
exits and assist with the traffic flow. There is an incentive for
volunteering, but you can only volunteer if you are a TMRA member. If
you are interested in helping, please get in contact with me. My email
is w8mal at arrl.net.
Mike W8MAL
TMRA Hamfest Committee
------------------------------
Message: 3
Date: Thu, 26 Feb 2015 23:17:38 -0500
From: jswanson3525 via TMRA <tmra at mailman.qth.net>
To: tmra at mailman.qth.net
Subject: Re: [TMRA] Hamfest Volunteers
Message-ID: <3p01sqxcqschdad9afb5aiq9.1425010658290 at email.android.com>
Content-Type: text/plain; charset=utf-8
Hi again Mike can I have a map of all the tables with there numbers and a list of who is assigned to what table that way when they come in I can send them towards the proper area were there table is ok thanks kd8qbh jim swanson 419-297-0331
Sent from my Verizon Wireless 4G LTE smartphone
-------- Original message --------
From:
Date:02/25/2015 6:00 PM (GMT-05:00)
To: tmra at mailman.qth.net
Subject: [TMRA] Hamfest Volunteers
Greetings All:
Hamfest is fast approaching and I am looking for volunteers to man the
doors checking tickets and acting as ushers helping vendors find their
spots. This is a really fun spot to volunteer for because not only do
you get a chance to welcome the vendors, but you also get a chance to
greet people coming in to the main area. What I need is some willing and
able bodies to help check tickets at the main door, watch the other
exits and assist with the traffic flow. There is an incentive for
volunteering, but you can only volunteer if you are a TMRA member. If
you are interested in helping, please get in contact with me. My email
is w8mal at arrl.net.
Mike W8MAL
TMRA Hamfest Committee
______________________________________________________________
TMRA mailing list
Home: http://mailman.qth.net/mailman/listinfo/tmra
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:TMRA at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
------------------------------
Message: 4
Date: Thu, 26 Feb 2015 23:23:48 -0500
From: jswanson3525 via TMRA <tmra at mailman.qth.net>
To: tmra at mailman.qth.net
Subject: Re: [TMRA] Hamfest Volunteers
Message-ID: <segpj8ksirhs519ndwuf3pbk.1425011028884 at email.android.com>
Content-Type: text/plain; charset=utf-8
Sorry to bother you again Mike but what time on Saturday and Sunday would you like me there jim swanson kd8qbh
Sent from my Verizon Wireless 4G LTE smartphone
-------- Original message --------
From:
Date:02/25/2015 6:00 PM (GMT-05:00)
To: tmra at mailman.qth.net
Subject: [TMRA] Hamfest Volunteers
Greetings All:
Hamfest is fast approaching and I am looking for volunteers to man the
doors checking tickets and acting as ushers helping vendors find their
spots. This is a really fun spot to volunteer for because not only do
you get a chance to welcome the vendors, but you also get a chance to
greet people coming in to the main area. What I need is some willing and
able bodies to help check tickets at the main door, watch the other
exits and assist with the traffic flow. There is an incentive for
volunteering, but you can only volunteer if you are a TMRA member. If
you are interested in helping, please get in contact with me. My email
is w8mal at arrl.net.
Mike W8MAL
TMRA Hamfest Committee
______________________________________________________________
TMRA mailing list
Home: http://mailman.qth.net/mailman/listinfo/tmra
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:TMRA at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
------------------------------
Message: 5
Date: Thu, 12 Mar 2015 04:59:40 -0400
From: Michael Lacumsky <w8mal at w8mal.com>
To: tmra at mailman.qth.net
Subject: [TMRA] Hamfest Volunteers
Message-ID: <5501557C.3010206 at w8mal.com>
Content-Type: text/plain; charset=windows-1252; format=flowed
Greetings All:
Hamfest is fast approaching and I am looking for volunteers to man the
doors checking tickets and acting as ushers helping vendors find their
spots. This is a really fun spot to volunteer for because not only do
you get a chance to welcome the vendors, but you also get a chance to
greet people coming in to the main area.
What I need is some willing and able bodies to help check tickets at the
main door, watch the other exits and assist with the traffic flow. There
is an incentive for volunteering, but you can only volunteer if you are
a TMRA member. If you are interested in volunteering, please get in
contact with me. My email is w8mal at arrl.net.
Mike W8MAL
TMRA Hamfest Committee
------------------------------
Message: 6
Date: Thu, 2 Apr 2015 02:37:45 -0700
From: Steve Bellner <stevebellner at outlook.com>
To: TMRA <tmra at mailman.qth.net>
Subject: [TMRA] Fwd: [YaesuSystemFusion] Digest Number 543
Message-ID: <BLU436-SMTP35859BF6AF190E04A7A42D3F20 at phx.gbl>
Content-Type: text/plain; charset="utf-8"; format=flowed
-------- Forwarded Message --------
Subject: [YaesuSystemFusion] Digest Number 543
Date: Thu, 2 Apr 2015 02:04:46 +0000
From: YaesuSystemFusion at yahoogroups.com
Reply-To: No Reply <notify-dg-YaesuSystemFusion at yahoogroups.com>
To: YaesuSystemFusion at yahoogroups.com
Yaesu System Fusion
Yahoo! Groups
<https://groups.yahoo.com/neo;_ylc=X3oDMTJlZmczdmh0BF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARzZWMDZnRyBHNsawNnZnAEc3RpbWUDMTQyNzk0MDI4Ng-->
Yaesu System Fusion Group
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/info;_ylc=X3oDMTJlamUyMnMzBF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARzZWMDaGRyBHNsawNocGgEc3RpbWUDMTQyNzk0MDI4Ng-->
15 Messages
Digest #543
1a
Re: Webinar Sunday April 12th at 6:00PM <#1a> by "Kent Hufford" kq4kk
1b
Re: Webinar Sunday April 12th at 6:00PM <#1b> by "Rick Holloway" k3ric
1c
Re: Webinar Sunday April 12th at 6:00PM <#1c> by jrospopo
1d
Re: Webinar Sunday April 12th at 6:00PM <#1d> by "Chris Wilson" n0csw
1e
100% duty cycle change by Yaesu <#1e> by "Will McGhie" vk6uu
1f
Re: 100% duty cycle change by Yaesu <#1f> by "Woodrick, Ed" ewoodrick
1g
Re: 100% duty cycle change by Yaesu <#1g> by n8nqp
2a
Re: Service Menue FTM-400? <#2a> by k9eq
3a
Re: Here's a first.... <#3a> by k9eq
3b
Re: Here's a first.... <#3b> by "jim" usswitek
4
HELP WIRES X problem <#4> by hammin75
5a
Re: Seems that <#5a> by K7VE
6a
Re: DR1XE de-sensing <#6a> by n8nqp
7a
Re: DR-1 Lockup <#7a> by "Steve" steves001_1951
8a
Re: New to group <#8a> by jvrphotos
Messages
1a
Re: Webinar Sunday April 12th at 6:00PM
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/conversations/topics/4695;_ylc=X3oDMTJyZ3ZodWwwBF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM0Njk1BHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzE0Mjc5NDAyODY->
Wed Apr 1, 2015 12:03 pm (PDT) . Posted by:
"Kent Hufford" kq4kk
<mailto:khufford at atlanticbb.net?subject=Re%3A%20Webinar%20Sunday%20April%2012th%20at%206%3A00PM>
6 PM? E, C, M, P, UTC?
MASTERS <sic>.
Kent
KQ4KK
From: YaesuSystemFusion at yahoogroups.com
[mailto:YaesuSystemFusion at yahoogroups.com]
Sent: Wednesday, April 1, 2015 1:17 PM
To: YaesuSystemFusion at yahoogroups.com
Subject: [YaesuSystemFusion] Webinar Sunday April 12th at 6:00PM
Hello Everyone,
We will be holding the Webinar Sunday April 12th at 6:00PM
I am looking for people who would like to present system fusion related
content. I know a lot of people are doing stuff with fusion so please
feel free to contact me direct if you would like a time slot.
I will be posting more details this weekend as well as a registration form.
Best Regards & 73,
Chris W / N0CSW
.
<http://geo.yahoo.com/serv?s=97359714/grpId=89652592/grpspId=1705063108/msgId=4694/stime=1427910931>
<http://y.analytics.yahoo.com/fpc.pl?ywarid=515FB27823A7407E&a=10001310322279&js=no&resp=img>
Reply to sender
<mailto:khufford at atlanticbb.net?subject=Re%3A%20Webinar%20Sunday%20April%2012th%20at%206%3A00PM>
. Reply to group
<mailto:YaesuSystemFusion at yahoogroups.com?subject=Re%3A%20Webinar%20Sunday%20April%2012th%20at%206%3A00PM>
. Reply via Web Post
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/conversations/messages/4695;_ylc=X3oDMTJyY2FrcDdrBF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM0Njk1BHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzE0Mjc5NDAyODY-?act=reply&messageNum=4695>
. All Messages (8)
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/conversations/topics/4694;_ylc=X3oDMTM2MjZkMGxrBF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM0Njk1BHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzE0Mjc5NDAyODYEdHBjSWQDNDY5NA-->
. Top ^ <#toc>
1b
Re: Webinar Sunday April 12th at 6:00PM
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/conversations/topics/4696;_ylc=X3oDMTJybms4ZDkyBF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM0Njk2BHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzE0Mjc5NDAyODY->
Wed Apr 1, 2015 12:04 pm (PDT) . Posted by:
"Rick Holloway" k3ric
<mailto:k3ric at yahoo.com?subject=Re%3A%20Webinar%20Sunday%20April%2012th%20at%206%3A00PM>
What time zone? Is that Pacific time? Or eastern?
Sent from my iPhone
> On Apr 1, 2015, at 1:17 PM, 'Chris Wilson' n0csw at n0csw.com
[YaesuSystemFusion] <YaesuSystemFusion at yahoogroups.com> wrote:
>
> Hello Everyone,
>
>
>
> We will be holding the Webinar Sunday April 12th at 6:00PM
>
>
>
> I am looking for people who would like to present system fusion
related content. I know a lot of people are doing stuff with fusion so
please feel free to contact me direct if you would like a time slot.
>
>
>
> I will be posting more details this weekend as well as a registration
form.
>
>
>
> Best Regards & 73,
>
>
>
> Chris W / N0CSW
>
>
>
>
> This email has been checked for viruses by Avast antivirus software.
> www.avast.com
>
>
>
Reply to sender
<mailto:k3ric at yahoo.com?subject=Re%3A%20Webinar%20Sunday%20April%2012th%20at%206%3A00PM>
. Reply to group
<mailto:YaesuSystemFusion at yahoogroups.com?subject=Re%3A%20Webinar%20Sunday%20April%2012th%20at%206%3A00PM>
. Reply via Web Post
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/conversations/messages/4696;_ylc=X3oDMTJyOGxiaTFmBF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM0Njk2BHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzE0Mjc5NDAyODY-?act=reply&messageNum=4696>
. All Messages (8)
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/conversations/topics/4694;_ylc=X3oDMTM2cTljazV2BF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM0Njk2BHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzE0Mjc5NDAyODYEdHBjSWQDNDY5NA-->
. Top ^ <#toc>
1c
Re: Webinar Sunday April 12th at 6:00PM
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/conversations/topics/4699;_ylc=X3oDMTJyZmtlbXF0BF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM0Njk5BHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzE0Mjc5NDAyODY->
Wed Apr 1, 2015 12:07 pm (PDT) . Posted by:
jrospopo
<mailto:ke4con at gmail.com?subject=Re%3A%20Webinar%20Sunday%20April%2012th%20at%206%3A00PM>
Chris,
Is that time eastern, central, pacific etc.
Thanks
Jim
Reply to sender
<mailto:ke4con at gmail.com?subject=Re%3A%20Webinar%20Sunday%20April%2012th%20at%206%3A00PM>
. Reply to group
<mailto:YaesuSystemFusion at yahoogroups.com?subject=Re%3A%20Webinar%20Sunday%20April%2012th%20at%206%3A00PM>
. Reply via Web Post
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/conversations/messages/4699;_ylc=X3oDMTJyZWs2NzZuBF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM0Njk5BHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzE0Mjc5NDAyODY-?act=reply&messageNum=4699>
. All Messages (8)
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/conversations/topics/4694;_ylc=X3oDMTM2OHE3OTBlBF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM0Njk5BHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzE0Mjc5NDAyODYEdHBjSWQDNDY5NA-->
. Top ^ <#toc>
1d
Re: Webinar Sunday April 12th at 6:00PM
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/conversations/topics/4701;_ylc=X3oDMTJyajdnYXJvBF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM0NzAxBHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzE0Mjc5NDAyODY->
Wed Apr 1, 2015 4:25 pm (PDT) . Posted by:
"Chris Wilson" n0csw
<mailto:n0csw at n0csw.com?subject=Re%3A%20Webinar%20Sunday%20April%2012th%20at%206%3A00PM>
pst =]
On 4/1/2015 11:00 AM, 'Kent Hufford' khufford at atlanticbb.net
[YaesuSystemFusion] wrote:
>
> 6 PM? E, C, M, P, UTC?
>
> MASTERS <sic>.
>
> Kent
>
> KQ4KK
>
> *From:*YaesuSystemFusion at yahoogroups.com
> [mailto:YaesuSystemFusion at yahoogroups.com]
> *Sent:* Wednesday, April 1, 2015 1:17 PM
> *To:* YaesuSystemFusion at yahoogroups.com
> *Subject:* [YaesuSystemFusion] Webinar Sunday April 12th at 6:00PM
>
> Hello Everyone,
>
> We will be holding the Webinar Sunday April 12^th at 6:00PM
>
> I am looking for people who would like to present system fusion
> related content. I know a lot of people are doing stuff with fusion so
> please feel free to contact me direct if you would like a time slot.
>
> I will be posting more details this weekend as well as a registration
> form.
>
> Best Regards & 73,
>
> Chris W / N0CSW
>
>
>
> .
>
>
>
Reply to sender
<mailto:n0csw at n0csw.com?subject=Re%3A%20Webinar%20Sunday%20April%2012th%20at%206%3A00PM>
. Reply to group
<mailto:YaesuSystemFusion at yahoogroups.com?subject=Re%3A%20Webinar%20Sunday%20April%2012th%20at%206%3A00PM>
. Reply via Web Post
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/conversations/messages/4701;_ylc=X3oDMTJya2NtNmdhBF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM0NzAxBHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzE0Mjc5NDAyODY-?act=reply&messageNum=4701>
. All Messages (8)
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/conversations/topics/4694;_ylc=X3oDMTM2MG9oczZ2BF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM0NzAxBHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzE0Mjc5NDAyODYEdHBjSWQDNDY5NA-->
. Top ^ <#toc>
1e
100% duty cycle change by Yaesu
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/conversations/topics/4702;_ylc=X3oDMTJyODNqdTFqBF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM0NzAyBHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzE0Mjc5NDAyODY->
Wed Apr 1, 2015 5:02 pm (PDT) . Posted by:
"Will McGhie" vk6uu
<mailto:will2 at iinet.net.au?subject=Re%3A%20100%25%20duty%20cycle%20change%20by%20Yaesu>
Hello all....
Yaesu's change with the specifications of the DR-1X power output is
disappointing.
It does not provide confidence in Yaesu's technical expertise with
repeaters.
We purchased our repeaters as 50 watt repeaters. There had been much
discussion
about the 50 watts and 100% duty cycle but any repeater that can run 50
watts has
to assume 100% duty cycle. Just how long is a QSO or net....?
The 50 watts at 50% duty cycle is technically silly for a repeater....
50 watts for 12 hours then no activity for 12 hours...?
50 watts for 15 minutes then no activity for 15 minutes...?
We were also told (right or not) that if the repeater running 50 watts
became too
hot then the power was reduced...Correct or not....?
Very disappointed Yaesu...
However that said they are a good repeater with a very sensitive
receiver and
great FM audio (and digital). I would like to see the basic repeater and its
internal controller have more flexibility so you don't have to interface
a separate
controller. Reading all the problems with doing this makes it appear for
many as
just too hard.
Regards
Will
VK6UU
Reply to sender
<mailto:will2 at iinet.net.au?subject=Re%3A%20100%25%20duty%20cycle%20change%20by%20Yaesu>
. Reply to group
<mailto:YaesuSystemFusion at yahoogroups.com?subject=Re%3A%20100%25%20duty%20cycle%20change%20by%20Yaesu>
. Reply via Web Post
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/conversations/messages/4702;_ylc=X3oDMTJyM204cjA3BF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM0NzAyBHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzE0Mjc5NDAyODY-?act=reply&messageNum=4702>
. All Messages (8)
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/conversations/topics/4694;_ylc=X3oDMTM2OTFlZDdyBF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM0NzAyBHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzE0Mjc5NDAyODYEdHBjSWQDNDY5NA-->
. Top ^ <#toc>
1f
Re: 100% duty cycle change by Yaesu
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/conversations/topics/4704;_ylc=X3oDMTJyZXRnajQzBF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM0NzA0BHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzE0Mjc5NDAyODY->
Wed Apr 1, 2015 7:02 pm (PDT) . Posted by:
"Woodrick, Ed" ewoodrick
<mailto:ewoodrick at ed-com.com?subject=Re%3A%20100%25%20duty%20cycle%20change%20by%20Yaesu>
Will,
I wonder where you saw that the repeater was rated at 50W at 100% duty
cycle.
Just curious.
Ed WA4YIH
From: YaesuSystemFusion at yahoogroups.com
[mailto:YaesuSystemFusion at yahoogroups.com]
Sent: Wednesday, April 1, 2015 7:47 PM
To: YaesuSystemFusion at yahoogroups.com
Subject: [YaesuSystemFusion] 100% duty cycle change by Yaesu
Hello all....
Yaesu's change with the specifications of the DR-1X power output is
disappointing.
It does not provide confidence in Yaesu's technical expertise with
repeaters.
We purchased our repeaters as 50 watt repeaters. There had been much
discussion
about the 50 watts and 100% duty cycle but any repeater that can run 50
watts has
to assume 100% duty cycle. Just how long is a QSO or net....?
The 50 watts at 50% duty cycle is technically silly for a repeater....
50 watts for 12 hours then no activity for 12 hours...?
50 watts for 15 minutes then no activity for 15 minutes...?
We were also told (right or not) that if the repeater running 50 watts
became too
hot then the power was reduced...Correct or not....?
Very disappointed Yaesu...
However that said they are a good repeater with a very sensitive
receiver and
great FM audio (and digital). I would like to see the basic repeater and
its
internal controller have more flexibility so you don't have to interface
a separate
controller. Reading all the problems with doing this makes it appear for
many as
just too hard.
Regards
Will
VK6UU
Reply to sender
<mailto:ewoodrick at ed-com.com?subject=Re%3A%20100%25%20duty%20cycle%20change%20by%20Yaesu>
. Reply to group
<mailto:YaesuSystemFusion at yahoogroups.com?subject=Re%3A%20100%25%20duty%20cycle%20change%20by%20Yaesu>
. Reply via Web Post
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/conversations/messages/4704;_ylc=X3oDMTJyYTllcnBlBF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM0NzA0BHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzE0Mjc5NDAyODY-?act=reply&messageNum=4704>
. All Messages (8)
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/conversations/topics/4694;_ylc=X3oDMTM2c3E1NzRyBF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM0NzA0BHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzE0Mjc5NDAyODYEdHBjSWQDNDY5NA-->
. Top ^ <#toc>
1g
Re: 100% duty cycle change by Yaesu
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/conversations/topics/4705;_ylc=X3oDMTJyNmtpOHNrBF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM0NzA1BHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzE0Mjc5NDAyODY->
Wed Apr 1, 2015 7:03 pm (PDT) . Posted by:
n8nqp
<mailto:n8nqp at yahoo.com?subject=Re%3A%20100%25%20duty%20cycle%20change%20by%20Yaesu>
Where did you get "You have to assume" You know what they say about
assuming, right? A lot of commercial gear fails your test...
73 N8NQP
Reply to sender
<mailto:n8nqp at yahoo.com?subject=Re%3A%20100%25%20duty%20cycle%20change%20by%20Yaesu>
. Reply to group
<mailto:YaesuSystemFusion at yahoogroups.com?subject=Re%3A%20100%25%20duty%20cycle%20change%20by%20Yaesu>
. Reply via Web Post
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/conversations/messages/4705;_ylc=X3oDMTJyb3RsMnA0BF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM0NzA1BHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzE0Mjc5NDAyODY-?act=reply&messageNum=4705>
. All Messages (8)
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/conversations/topics/4694;_ylc=X3oDMTM2ZzB0ajZwBF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM0NzA1BHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzE0Mjc5NDAyODYEdHBjSWQDNDY5NA-->
. Top ^ <#toc>
2a
Re: Service Menue FTM-400?
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/conversations/topics/4697;_ylc=X3oDMTJyZGQ1ZDZuBF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM0Njk3BHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzE0Mjc5NDAyODY->
Wed Apr 1, 2015 12:05 pm (PDT) . Posted by:
k9eq
<mailto:K9EQ at HamOperator.com?subject=Re%3A%20Service%20Menue%20FTM-400%3F>
Stef,
There are no adjustments in the radio. Calibration is performed
electronically via the interface port.
Yaesu has not published the "Technical Supplements" for the Fusion
radios, and thus has not published the calibration procedures.
There are limits on how low a power amplifier should be set. 5 watts to
50 watts is a large dynamic range. Reducing the power by any significant
amount could result in instabilities or other unintended consequences.
My suggestion is to attenuate the transmit signal as needed. The "poor
man's" way of doing this is to use cable with high loss, such as RG-58/U.
I have an Icom FR6000 which does provide a tool with their programmings
software to calibrate the radio. I too wanted to adjust the power down.
I know this is a different radio, but the Tx became unstable at about
2.5 watts. I ended up setting it at 3.9 to provide sufficient safety
margin. Not much of a drop from 5 watts.
Hope this helps,
Chris, K9EQ
Reply to sender
<mailto:K9EQ at HamOperator.com?subject=Re%3A%20Service%20Menue%20FTM-400%3F>
. Reply to group
<mailto:YaesuSystemFusion at yahoogroups.com?subject=Re%3A%20Service%20Menue%20FTM-400%3F>
. Reply via Web Post
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/conversations/messages/4697;_ylc=X3oDMTJyZDc0aHNzBF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM0Njk3BHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzE0Mjc5NDAyODY-?act=reply&messageNum=4697>
. All Messages (7)
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/conversations/topics/4680;_ylc=X3oDMTM2cjlmaWNnBF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM0Njk3BHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzE0Mjc5NDAyODYEdHBjSWQDNDY4MA-->
. Top ^ <#toc>
3a
Re: Here's a first....
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/conversations/topics/4698;_ylc=X3oDMTJyNzBjbHE0BF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM0Njk4BHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzE0Mjc5NDAyODY->
Wed Apr 1, 2015 12:07 pm (PDT) . Posted by:
k9eq
<mailto:K9EQ at HamOperator.com?subject=Re%3A%20Here%27s%20a%20first%2E%2E%2E%2E>
Ken,
The display is controlled by one of the two display boards mounted on
top of each other. The back board, which you can easily see, is for the
Tx and doesn't actually have a display connected to it. (I have no idea
why it needs to be there.)
The Tx, Rx, and both display boards have boot/run switches that need to
be in the run position. Boot is used to update firmware. So far we have
only updated firmware for the Rx, which contains the repeater controller.
Some things to try:
1. Verify that all connections are solid, particularly from the Rx to
the front display panel.
2. Try reloading the firmware (1.00Z) which is installed in the Rx.
3. I think this will work, but do this at your own risk: Connect an
FTM-400 display to the Rx and see if it works. If it does but the
repeater doesn't, you at least know where the problem is. At any case,
it's likely you will be returning the unit to Yaesu for repair if #1 and
#2 don't work.
I have 3 DR-1(X) machines and have never seen this problem.
The lack of the start up sounds indicates to me that the Rx controller
is at fault. However, if the Rx is not able to work with the display
board, that will cause the Rx not to work.
73,
Chris, K9EQ
(You didn't break anything whilst exploring, did you?) Whatever you do,
don't plug or unplug things while the system is powered! Especially the
display boards! That's a good way to brick the repeater.
Reply to sender
<mailto:K9EQ at HamOperator.com?subject=Re%3A%20Here%27s%20a%20first%2E%2E%2E%2E>
. Reply to group
<mailto:YaesuSystemFusion at yahoogroups.com?subject=Re%3A%20Here%27s%20a%20first%2E%2E%2E%2E>
. Reply via Web Post
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/conversations/messages/4698;_ylc=X3oDMTJybGNkMzR2BF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM0Njk4BHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzE0Mjc5NDAyODY-?act=reply&messageNum=4698>
. All Messages (7)
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/conversations/topics/4680;_ylc=X3oDMTM2YzhoNThoBF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM0Njk4BHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzE0Mjc5NDAyODYEdHBjSWQDNDY4MA-->
. Top ^ <#toc>
3b
Re: Here's a first....
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/conversations/topics/4700;_ylc=X3oDMTJyaDVoazZvBF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM0NzAwBHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzE0Mjc5NDAyODY->
Wed Apr 1, 2015 1:16 pm (PDT) . Posted by:
"jim" usswitek
<mailto:jlange50 at comcast.net?subject=Re%3A%20Here%27s%20a%20first%2E%2E%2E%2E>
Ken,
The only difference we have noted is that pin 8 (discriminator output)
is not. It is squelched, filtered audio. No CTCSS comes out so using an
external decoder will not work. The wiring to the RX section in the beta
and production units is completely different. Some of the wires are
soldered directly to IC pins and we haven't had the desire to let the
magic smoke out trying to find an alternate source of audio.
Jim
WA2RJP
----- Original Message -----
From: Ken Arck ah6le at ah6le.net [YaesuSystemFusion]
To: YaesuSystemFusion at yahoogroups.com
Sent: Wednesday, April 01, 2015 11:48 AM
Subject: RE: [YaesuSystemFusion] Here's a first....
I can't even get the unit to reset (using the procedure outlined in the
User Manual).
As for the ADR working with the beta DR1, my understanding is that not
all the signals needed by the ADR are available on the back panel DB15
without a hardware upgrade. Perhaps someone can clarify this
Ken
At 08:41 AM 4/1/2015, you wrote:
Ken
NO!? I have three at one site a Beta and two DR-1Xs.? I have the
displays set to turn off after five min of no touching the screen.
The Beta has been on 24/7 since about May of last year.? One of the
DR-1Xs since just after Dayton last year and the other one since late
last yesr.
Hope this info helps.
BTW will the ADR interface work on the old Beta box??
Thanks
Steve N4GXX
From: YaesuSystemFusion at yahoogroups.com [
mailto:YaesuSystemFusion at yahoogroups.com]
Sent: Wednesday, April 01, 2015 10:21 AM
To: YaesuSystemFusion at yahoogroups.com
Subject: [YaesuSystemFusion] Here's a first....
Our DR1x has been powered up 24/7 in our shop since around the 1st of
year (this is our unit we use for testing our ADR Interface).
I came into the shop this morning to see the display a solid white
color. The receiver seems to be working ok and the transmitter is
making power but not on its programmed channel - it should be on
442.675 but it is now actually doing so on 442.700.
Also, we're unable to make any changes as the touch screen appears to
be dead as well. A power cycle doesn't correct the problem and we
notice the usual "start up" tone sequence is not heard in the local
speaker either.
Anyone else experienced a similar failure?
Ken
----------------------------------------------------------
President and CTO - Arcom Communications
Makers of repeater controllers and accessories.
http://www.arcomcontrollers.com/
Authorized Dealers for Kenwood and Telewave and
we offer complete repeater packages!
AH6LE/R - IRLP Node 3000
http://www.irlp.net
"We don't just make 'em. We use 'em!"
----------------------------------------------------------
President and CTO - Arcom Communications
Makers of repeater controllers and accessories.
http://www.arcomcontrollers.com/
Authorized Dealers for Kenwood and Telewave and
we offer complete repeater packages!
AH6LE/R - IRLP Node 3000
http://www.irlp.net
"We don't just make 'em. We use 'em!"
Reply to sender
<mailto:jlange50 at comcast.net?subject=Re%3A%20Here%27s%20a%20first%2E%2E%2E%2E>
. Reply to group
<mailto:YaesuSystemFusion at yahoogroups.com?subject=Re%3A%20Here%27s%20a%20first%2E%2E%2E%2E>
. Reply via Web Post
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/conversations/messages/4700;_ylc=X3oDMTJyODVuNGZlBF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM0NzAwBHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzE0Mjc5NDAyODY-?act=reply&messageNum=4700>
. All Messages (7)
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/conversations/topics/4680;_ylc=X3oDMTM2OWt2MTQxBF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM0NzAwBHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzE0Mjc5NDAyODYEdHBjSWQDNDY4MA-->
. Top ^ <#toc>
4
HELP WIRES X problem
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/conversations/topics/4703;_ylc=X3oDMTJydGo1ZGwzBF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM0NzAzBHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzE0Mjc5NDAyODY->
Wed Apr 1, 2015 5:23 pm (PDT) . Posted by:
hammin75
<mailto:hammin75 at yahoo.com?subject=Re%3A%20HELP%20WIRES%20X%20problem>
PlaySoundThread WaveOutOpen Error Code=4
ALl ports are green etc.. It connects fine but then i get this error
when it's gettting an incoming signal and then locks to ON AIR and
doesn't come back off
Reply to sender
<mailto:hammin75 at yahoo.com?subject=Re%3A%20HELP%20WIRES%20X%20problem> .
Reply to group
<mailto:YaesuSystemFusion at yahoogroups.com?subject=Re%3A%20HELP%20WIRES%20X%20problem>
. Reply via Web Post
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/conversations/messages/4703;_ylc=X3oDMTJyaWYwN2k5BF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM0NzAzBHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzE0Mjc5NDAyODY-?act=reply&messageNum=4703>
. All Messages (1)
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/conversations/topics/4703;_ylc=X3oDMTM2MTByY2poBF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM0NzAzBHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzE0Mjc5NDAyODYEdHBjSWQDNDcwMw-->
. Top ^ <#toc>
5a
Re: Seems that
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/conversations/topics/4706;_ylc=X3oDMTJycTR2cnM0BF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM0NzA2BHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzE0Mjc5NDAyODY->
Wed Apr 1, 2015 7:03 pm (PDT) . Posted by:
K7VE <mailto:john at hays.org?subject=Re%3A%20Seems%20that>
I wouldn't be too quick to jump on the idea the AMBE will be 'patent
free' in 2017. The original patents are about to expire, but like any
company there are newer patents on improvements to AMBE and Fusion uses
the newer methods which are implemented in the AMBE-3000 series (and
their firmware license equivalents).
DVSI is known to enforce their intellectual property rights.
The AMBE chip is just a component like the microprocessors and other
patented components in your radios.
Reply to sender <mailto:john at hays.org?subject=Re%3A%20Seems%20that> .
Reply to group
<mailto:YaesuSystemFusion at yahoogroups.com?subject=Re%3A%20Seems%20that>
. Reply via Web Post
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/conversations/messages/4706;_ylc=X3oDMTJyYWplMHFhBF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM0NzA2BHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzE0Mjc5NDAyODY-?act=reply&messageNum=4706>
. All Messages (11)
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/conversations/topics/4656;_ylc=X3oDMTM2azltMGFiBF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM0NzA2BHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzE0Mjc5NDAyODYEdHBjSWQDNDY1Ng-->
. Top ^ <#toc>
6a
Re: DR1XE de-sensing
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/conversations/topics/4707;_ylc=X3oDMTJydTJyMXUxBF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM0NzA3BHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzE0Mjc5NDAyODY->
Wed Apr 1, 2015 7:03 pm (PDT) . Posted by:
n8nqp <mailto:n8nqp at yahoo.com?subject=Re%3A%20DR1XE%20de-sensing>
I can't fault Yaesu per se RF Best practices apply no matter what the
label on the box is. I would also network with folks that have "been
there, done that" While flatpack duplexers look ok on paper, you really
can't run them on a repeater where you need the split you do.
Good luck!
Regards,
Mike N8NQP
Reply to sender
<mailto:n8nqp at yahoo.com?subject=Re%3A%20DR1XE%20de-sensing> . Reply to
group
<mailto:YaesuSystemFusion at yahoogroups.com?subject=Re%3A%20DR1XE%20de-sensing>
. Reply via Web Post
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/conversations/messages/4707;_ylc=X3oDMTJydmQxcjZ0BF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM0NzA3BHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzE0Mjc5NDAyODY-?act=reply&messageNum=4707>
. All Messages (10)
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/conversations/topics/4646;_ylc=X3oDMTM2MmMyNnRwBF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM0NzA3BHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzE0Mjc5NDAyODYEdHBjSWQDNDY0Ng-->
. Top ^ <#toc>
7a
Re: DR-1 Lockup
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/conversations/topics/4708;_ylc=X3oDMTJyb2JyNGk2BF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM0NzA4BHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzE0Mjc5NDAyODY->
Wed Apr 1, 2015 7:04 pm (PDT) . Posted by:
"Steve" steves001_1951
<mailto:steves001 at cox.net?subject=Re%3A%20DR-1%20Lockup>
John
Quick question are you guys using CTCSS or DCS?
If your using DCS and NOT using the 15 pin port, then upgrade to ver ?R?
or ?Z? for the DR-1X.
Steve N4GXX
From: YaesuSystemFusion at yahoogroups.com
[mailto:YaesuSystemFusion at yahoogroups.com]
Sent: Sunday, March 29, 2015 9:07 PM
To: YaesuSystemFusion at yahoogroups.com
Subject: Re: [YaesuSystemFusion] DR-1 Lockup
Thanks for the info Jim, I have been out of state in Texas for the last
month and had to leave the system in fixed analog. Now that i'm back I
will check out the 1x update and may very well take your suggestion on
the "Z". I really don't care about the rear port I just want the machine
to behave itself.
John O'
K1JRO
_____
From: "'jim' jlange50 at comcast.net [YaesuSystemFusion]"
<YaesuSystemFusion at yahoogroups.com>
To: YaesuSystemFusion at yahoogroups.com
Sent: Tuesday, February 24, 2015 4:12 PM
Subject: Re: [YaesuSystemFusion] DR-1 Lockup
?
John,
Any of the firmware updates for the DR-1X will work with the DR-1. The
only caveat is that the install notes will tell you they can't guarantee
if some of the functions on the 15 pin connector may not work. The only
thing I have found is that the dicriminator audio out no longer is. We
currently use the Z version firmware on the DR-1 with no ill effects.
Jim
WA2RJP
----- Original Message -----
From: john o'Neill oneilljr at yahoo.com [YaesuSystemFusion]
<mailto:oneilljr at yahoo.com%20[YaesuSystemFusion]>
To: YaesuSystemFusion at yahoogroups.com
Sent: Tuesday, February 24, 2015 1:50 PM
Subject: [YaesuSystemFusion] DR-1 Lockup
It appears that our DR-1 has locked up in the middle of a digital QSO.
Almost like it has timed out only it never came back. We heard some
strange audio during one of the participants transmissions than the
repeater won't key up. I am going up to the site to check it later
today. I recall some users having a "lock-up issue". without going
through hundreds of messages is there a fix for this? Also, is there a
firmware update for the DR-1 that I can try? I don't see any files out
there for the DR-1 just the DR-1X. If someone has a firmware update for
the DR-1 can they pass it along to me.
Thanks,
John O'
W1SSH
Reply to sender <mailto:steves001 at cox.net?subject=Re%3A%20DR-1%20Lockup>
. Reply to group
<mailto:YaesuSystemFusion at yahoogroups.com?subject=Re%3A%20DR-1%20Lockup>
. Reply via Web Post
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/conversations/messages/4708;_ylc=X3oDMTJyMHJxYmp2BF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM0NzA4BHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzE0Mjc5NDAyODY-?act=reply&messageNum=4708>
. All Messages (13)
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/conversations/topics/3581;_ylc=X3oDMTM2aDZkYW9yBF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM0NzA4BHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzE0Mjc5NDAyODYEdHBjSWQDMzU4MQ-->
. Top ^ <#toc>
8a
Re: New to group
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/conversations/topics/4709;_ylc=X3oDMTJybzkwdWY4BF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM0NzA5BHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzE0Mjc5NDAyODY->
Wed Apr 1, 2015 7:04 pm (PDT) . Posted by:
jvrphotos <mailto:jvr911 at gmail.com?subject=Re%3A%20New%20to%20group>
Hi Terry,
Welcome to system fusion and I would point out that there is a group
dedicated to FT400 users which you may wish to consider. As a user who
has perhaps been through many frustrations that you may encounter please
do not hesitate to seek answers should you encounter any problem. I
hasten to add the manual is superb and I am sure you do not need me to
suggest reading it cover to cover before operating your "new toy". Enjoy
C4FM as the audio quality will blow your mind.
Victor 2M0JVR.
Reply to sender
<mailto:jvr911 at gmail.com?subject=Re%3A%20New%20to%20group> . Reply to
group
<mailto:YaesuSystemFusion at yahoogroups.com?subject=Re%3A%20New%20to%20group>
. Reply via Web Post
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/conversations/messages/4709;_ylc=X3oDMTJyYnNrYnF1BF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM0NzA5BHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzE0Mjc5NDAyODY-?act=reply&messageNum=4709>
. All Messages (4)
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/conversations/topics/4506;_ylc=X3oDMTM2bzFwcmo0BF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM0NzA5BHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzE0Mjc5NDAyODYEdHBjSWQDNDUwNg-->
. Top ^ <#toc>
Visit Your Group
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/info;_ylc=X3oDMTJmNGk0dHZnBF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARzZWMDdnRsBHNsawN2Z2hwBHN0aW1lAzE0Mjc5NDAyODY->
* New Members
<https://groups.yahoo.com/neo/groups/YaesuSystemFusion/members/all;_ylc=X3oDMTJnZGtkM2JmBF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARzZWMDdnRsBHNsawN2bWJycwRzdGltZQMxNDI3OTQwMjg2>
44
Yahoo! Groups
<https://groups.yahoo.com/neo;_ylc=X3oDMTJlZmczdmh0BF9TAzk3MzU5NzE1BGdycElkAzg5NjUyNTkyBGdycHNwSWQDMTcwNTA2MzEwOARzZWMDZnRyBHNsawNnZnAEc3RpbWUDMTQyNzk0MDI4Ng-->
? Privacy <https://info.yahoo.com/privacy/us/yahoo/groups/details.html>
? Unsubscribe
<mailto:YaesuSystemFusion-unsubscribe at yahoogroups.com?subject=Unsubscribe>
? Terms of Use <https://info.yahoo.com/legal/us/yahoo/utos/terms/>
------------------------------
Subject: Digest Footer
_______________________________________________
TMRA mailing list
TMRA at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/tmra
------------------------------
End of TMRA Digest, Vol 77, Issue 1
***********************************
More information about the TMRA
mailing list