[TMC] SLM-2 Sideband level Monitor

[John Vendely]

I would suggest looking at the manual for the auxiliary frame of the 
non-synthesized version of the GPT-10K.  There isn't much to the SLM, 
and its alignment and calibration is extremely simple, so this 
information would be in the aux frame manual, not in a separate 
dedicated manual.

73,

John K9WT

On 3/18/2022 10:29 AM, Chris Bolkan wrote:
> Hi TMC Lovers,
>
> I have an SLM-2 Sideband Level Monitor that mates with an SBE exciter in
> some of the GPT-10K systems. At least that's the only place I have seen it
> looking through John's TMC library. It has two meters and displays the
> modulation level out of the 250Khz Balanced Modulators in the SBE.
>
> I have the SLM-2 connected to the SBE and working. What I am looking for is
> a manual that contains the schematic and any setup/calibration information.
> There is not a separate manual in the archives for the SLM-2. The best I
> have found is reference to it in one of the system manuals, but there is no
> schematic or detailed information.
>
> Does anyone know of a dedicated manual for this device, or perhaps where it
> is more completely detailed in a higher level manual?
>
> Many thanks!
>
> Chris Bolkan
> KI7NXY
> ______________________________________________________________
> TMC mailing list
> Home:http://mailman.qth.net/mailman/listinfo/tmc
> Help:http://mailman.qth.net/mmfaq.htm
> Post:mailto:TMC at mailman.qth.net
>
> This list hosted by:http://www.qsl.net
> Please help support this email list:http://www.qsl.net/donate.html