[TMC] AMC-32 question

[Robert Nickels]

On 2/3/2022 4:48 PM, John Vendely wrote:
> there is a gain compression spec which implies the coupler should be 
> in no more than about 3 dB gain compression with an 8V p-p signal 
> applied--a whopping big signal into 50 ohms.  So we're probably safe 
> in assuming that the input damage level is somewhere well above that. 

I saw that too John, and figured the same.   Thanks for confirming.   
I've had less than stellar luck with this multicoupler, mostly 
heat-related, but the addition of a muffin fan seems to have helped.     
The PCBs aren't too robust to begin with and repeated repairs haven't 
helped, I may lay out a board so I can replace them with new ones as 
needed.    Good performance as you'd expect.

Bob