[TMC] SBE-3 question
Chris Bolkan
bolkyboats at gmail.com
Wed Feb 2 12:25:27 EST 2022
Hi Meir,
I checked for a clean sine wave on pin 5 of V-126 and there is a nice clean
sine wave there depending on carrier level exactly as you explained.
Thank you so much for the help!
Best regards,
Chris
KI7NXY
On Tue, Feb 1, 2022 at 12:27 PM Meir Ben-Dror WF2U <wf2u at ws19ops.com> wrote:
> Chris,
>
> The waveform out of an oscillator without a resonant circuit in the output
> is going to look pretty weird and dirty, as it is full of harmonics.
> Look at the output of V126 (6AH6) as it feeds T127, which is a tuned
> circuit for 250 kHz.
> What you want to do, is to turn the two audio input channels OFF and turn
> the carrier insertion up, until you have a decent amount of 250 kHz signal
> visible at the plate of V126.
> You should see a reasonably clean sinewave there.
>
> Let me know how that worked out.
>
> 73, Meir WF2U
> Landrum, SC
>
> Get BlueMail for Android <https://bluemail.me>
> On Feb 1, 2022, at 12:55 PM, Chris Bolkan <bolkyboats at gmail.com> wrote:
>>
>> Hi TMC lovers!
>>
>> I am currently trying to bring up a rough SBE-3 to operational condition
>> and need some help. I have no experience to pull on so I am hoping someone
>> on here has "been there and done that". I am starting by looking for the
>> most basic functionality...are the oscillators oscillating? The first
>> oscillator I am troubleshooting is the 250Khz sideband carrier (Z-103,
>> Z-108). It seems to me that this oscillator should be outputting a pure
>> looking sine wave. Mine is oscillating at the right frequency, and I
>> believe the final amplitude out of the cathode follower is approximately
>> correct, but the waveform is horrendous. Should it be a clean sine wave
>> like I think it should be or is it OK that it looks like $h1t?
>>
>> I've looked the circuit over, checked component values and believe there
>> are no out of tolerance resistors or leaky caps, but something just doesn't
>> seem right.
>>
>> It seems to me that if this oscillator is creating the (re)inserted carrier
>> it should be a pretty clean waveform. Any thoughts?
>>
>> Best regards,
>>
>> Chris
>> KI7NXY
>>
>>
More information about the TMC
mailing list