[TMC] TMC items FS

[Larry]

Excess items:

TMC SBE-2 transformer Z-101, this is a used item.  When i had an SBE-2 i 
thought the one in it was bad so i picked up a spare. Didn't use it.  
Make offer

TMC transformer TF-104.  110 Vac primary and 6.3 VAC @ 4.125 A 
secondary.  Probably bought this for a spare, didn't use it.  Make offer

TMC DC ma meter i think for the SBT-1 or PAL-1 series amps. 0-750 ma 
Dc.  Thought it would be nice to have one for my SBT-1K(J).  Didn't need 
it.  Meter terminals strapped.  $10

TMC 0-8 Amps RF.  Was this for the TAC antenna tuner?  I haven't use 
it.  Meter terminals are strapped to keep the meter from reading 
erratically.  $10

TMC meter from the GPE-1, maybe others.  Not the best shape but 
complete.  It's the way it arrived at my QTH when i acquired it years 
back.  $10

Solitron Devices DD115 6932, this is the CR-101 plugin in the SBE-2, 
others?  Who needs it?

Connectors:

  3 ea. MS3106B20-27P with back shell,  new connector.  $15

  2 ea. MS3106B20-27S (C) with back shell, new connector  $15

TMC rack A/C plugs.  These are the smaller two pin twist lock style that 
fit into the rack mounted A/C power strip.  I have 3 of them it appears.

Mic connectors, I have 5 of the 6 pin type that fit into the front of 
the GPE exciter.  Two are new and three are used.  $8 ea.

Add in postage from 85606.

Stuff needs to find a new home as i am downsizing everything.

TMC-GPE-1A.  $350.

TMC PAL-500 Amp with spare tubes (4CX350A). $800

TMC PSP-500 power supply and original interconnecting cable. Goes with 
PAL-500

TMC GPR-90, very nice clean operating receiver. $500

$1500 for the package, can't ship.  Inquire for pictures. Everything is 
in excellent working condition and appearance considering it's age.  All 
units have been taken care of, no outside storage or mishandling.  I run 
it at about 125W out on 40M phone although it will do a lot more, 
probably 200w anyway.  Guess i run it conservative.  Nice bunch of radio 
equipment.  AND, i have a two prong plug that goes into the back of the 
receiver for relay operation/control, for muting.

Manuals for everything listed, mostly copies but good ones and an 
original for the GPE-1.

I have a pile of stuff that has been listed previously with no 
inquiries.  Everything not sold goes on the pile and will end up in the 
scrap yard.  Time is growing shorter.

Larry W0OGH

85606, Cochise County, AZ.