[TMC] SBE Mic connector?

[Richard Knoppow]

    Forgot the last part. You will have to wire the mic to the 
connector. Some microphones came with connectors on the mic and 
some with similar connectors although with differing numbers of 
pins, some came with with cords attached. If your mic does not 
have an attached cord but rather a connector you will have to 
obtain the correct connector for it.
   The handbook shows how to wire the connector. Pin 1 is hot, 
pin 2 is ground, pin 3 is push to talk. The inputs on the back 
terminals are high level, low impedance, not for microphones.

On 6/9/2020 1:04 PM, W2HX wrote:
> Hi all, what is the name of the Mic (or MIKE) connector on the front of the SBE-2/3? And are mics findable with this connector on it and wired properly? Or must I wire a mic up myself?
>
> Thanks
> Eugene
>
>
> ______________________________________________________________
> TMC mailing list
> Home: http://mailman.qth.net/mailman/listinfo/tmc
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:TMC at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

-- 
Richard Knoppow
1oldlens1 at ix.netcom.com
WB6KBL