[TMC] Connectors question

[john poulton]

Bruce and the group,

Great to see you posting again!

That would, of course, be the William Perry Co. in Louisville, KY.  Bill is a great guy and has forgotten more
about connectors than most of us will ever know. 

The one slight issue with Bill is that he really likes to do business the old fashioned way.  YOu'll need to
call him (502-893-8724), and talk to him in person, so to speak.  He has an email account, but (I can tell
you from experience) he never ever reads it!  So:  call him, discuss the connectors and their price, then
he'll ship you the connectors with a bill attached.  Return a check to him by mail.

If you absolutely need to communicate with Bill by email, you might try emailing his daughter Christie.
She's also a great person to deal with, and she's doing her  best to bring dad into the 21st century.. :)

christie.perry at insightbb.com

Bill's supplied many connectors to us TMC collectors over the years..  Just be prepared:  MIL connectors
are not cheap.

73, John K4OZY


On May 27, 2013, at 10:50 AM, triodes at optonline.net wrote:

> Gentlemen,
> 
> I thought I would chime in here and offer my two cents in an attempt to help Rodolfo.
> 
> As I recall, TMC used the MS- (Military Standard) designation within their manuals (and where applicable) for these circular shell-type connectors.
> 
> That being the case, if Rodolfo can identify the equipment where these connectors he is need of are used, then the corresponding MS number for the connector asembly can be found.
> 
> Once the MS number is determined, these connectors can typically be sourced from Newark Electronics, or there is a fellow in Kentucky (who advertises these connectors in the classified section of  Electric Radio Magazine) that can possibly supply them as well. I purchased brand-new Amphenol MS-connectors from him to make my own interconnecting cable assembly between my TMC PAL-1K and the mating PS-4 Power Supply Unit, and the pricing and service from him was excellent.
> 
> Rodolfo, good luck in this endeavor, and we look forward to your reply.
> 
> 73,
> 
> Bruce, W2XR
> 
> ----- Original Message -----
> From: Nick England 
> Date: Sunday, May 26, 2013 5:30 pm
> Subject: Re: [TMC] Connectors question
> To: TMC at mailman.qth.net
> 
>> FWIW, I have posted photos of the connectors here -
>> http://www.navy-radio.com/rcvrs/frr60-2.htm#amphenol
>> Nick K4NYW
>> www.navy-radio.com
>> 
>> On Sun, May 26, 2013 at 2:28 PM, RODOLFO EGULIAN 
>> wrote:
>>> Hi: I need the followings AMPHENOL connectors for my TMC 
>> equipments:> Amphenol model 67-06C18-64P Amphenol model 
>> 67-06C18-64S Who knows where to obtain them?
>>> Thank you.
>>> Rodolfo LU9YYV
>> ______________________________________________________________
>> TMC mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/tmc
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:TMC at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> 
> ______________________________________________________________
> TMC mailing list
> Home: http://mailman.qth.net/mailman/listinfo/tmc
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:TMC at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html