[TMC] Parts

[Ira Curtis]

Hi Larry,
How Much for the vox?
CE3AM
Ira G. Curtis
Mount-Scopus Ltda.
EWACS 
Early Warning Alert Systems 
Engineering and Installation
Cell: 9-519-1417

 

> Date: Thu, 9 Feb 2012 20:37:50 -0500
> From: telegrapher at q.com
> To: tmc at mailman.qth.net
> Subject: [TMC] Parts
> 
> While its not imperative that i have these, i would like to find them if any extras are out there
> 
> Panel meter for the GPE-1A, While this one works it sometimes sticks or is very sluggish at the bottom of the scale. The zero adjust works fine, just the movement is a bit stiffer than the one on my other GPE-1.
> 
> My KW rig, a TMC SBT-1K(J) has a meter in the PA deck that has a bent pointer. Slight bend at that but never the less it needs either repaired or replaced. Its the multi scale meter and not the one that reads Ip.
> 
> I have a pair of VOX units. ONly need one so if your in need of one to fill out a rack, and yes it does work including the ovens, its available. This one also has the panel switch for motor tuning of the VMO. That means rapid QSY action up and down.
> 
> Larry
> W0OGH
> ______________________________________________________________
> TMC mailing list
> Home: http://mailman.qth.net/mailman/listinfo/tmc
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:TMC at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html