[TMC] pal-350

[Ira Curtis]

Hi John,
Thanks for info,
Yes I am aware of the interlocks of course. You can neutralize it by pulling 
it upward, this is a built in feature.
Pull-up and be very careful.
Hope you get the power supply....
Ira.
----- Original Message ----- 
From: "john d kopke" <jdkopke at cablespeed.com>
To: "Ira Curtis" <kch at tie.cl>
Sent: Sunday, May 07, 2006 8:33 PM
Subject: Re: [TMC] pal-350


> Hi IRA;
> My pal-350 has an interlock switch which is activated when the cover is 
> removed, the voltages inside exceed 3KV Unhealthful.
> at best, I am not an expert, and dant even have a power supply as yet(Im 
> looking ) but I noticed the Interlocks (Top AND Bottom ) when I cleaned it 
> up.
> john
> ----- Original Message ----- 
> From: "Ira Curtis" <kch at tie.cl>
> To: <tmc at mailman.qth.net>
> Sent: Sunday, May 07, 2006 6:09 PM
> Subject: [TMC] pal-350
>
>
> Hi  All
> Can anyone tell me the exact procedure for adjusting the ALDC in the 
> PAL-350?
> Read the manual over and over again -no trace.
> What would be the best way to connect the SBE-2 to the Pal 350  ALDC?
> I have found out that PAL-350 neutralization  changes with the top  cover 
> on or  off.Not much though, but it changes. Any idea as to how can I 
> neutralize the amplifier with the covers installed and preferably the 
> amplifier installed in it's  rack?
> any idea is well welcome...
> Ira
> CE3AM,,,,,,,,4X4SW
> ______________________________________________________________
> TMC mailing list
> Home: http://mailman.qth.net/mailman/listinfo/tmc
> Help: http://mailman.qth.net/faq.htm
> Post: mailto:TMC at mailman.qth.net
>